Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 32mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 40mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 41mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 43mm

Rubber Drive Belt with Square Section. Thickness: 1mm, Inside Diameter: 51mm

Rubber Drive Belt Square Section, Thickness: 2mm Inside Diameter 51mm

Rubber Drive Belt with Square Section. Thickness: 1.3mm, Inside Diameter: 51mm

Rubber Drive Belt with Square Section. Thickness: 1.6mm, Inside Diameter: 51mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 54mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 57mm

Rubber Drive Belt Square Section, Thickness: 2.4mm Inside Diameter 60.5mm

Rubber Drive Belt with Square Section. Thickness: 1mm, Inside Diameter: 63.5mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 82mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 83mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 85mm

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 92mm

Rubber Drive Belt Square Section, Thickness: 2mm Inside Diameter 96mm

Rubber Drive Belt Square Section, Thickness: 2.4mm Inside Diameter 98.5mm

Diode TO220 Schottky Barrier 8A 40V Suggested Equivalent: SB850

NPN TO92 CBE 40V 1.5A 1W 100MHz. SS8050 also known as S8050

PNP TO92 CBE 40V 1.5A 1W 100MHz. SS8550 also known as S8550

PNP TO92 CBE 40V 500mA 270MHz. SS9012 is also known as S9012, KTC9012

SSR-25 DA Solid State Relay 25A 

SSR-40 DA Solid State Relay 40A 

Technical Specifications

Input Operating Voltage: 3-32V DC
Output Operating Voltage: 24-380V AC
Trigger Current: 7.5mA @ 12V
Dielectric Strength: ≥2.5KV AC/1min.
Isolation Strength  ≥50MΩ/500V DC
Control Method: Zero Cross Trigger
Voltage Drop: 1.6V @ 25°
Operating temperature: -20°C to +80­°C
Weight: 105g

 

SSR-60 DA Solid State Relay 60A 

Technical Specifications

Input Operating Voltage: 3-32V DC
Output Operating Voltage: 24-380V AC
Trigger Current: 7.5mA @ 12V
Dielectric Strength: ≥2.5KV AC/1min.
Isolation Strength  ≥50MΩ/500V DC
Control Method: Zero Cross Trigger
Voltage Drop: 1.6V @ 25°
Operating temperature: -20°C to +80­°C
Weight: 105g

 

IC 4 Input NOR Function Gate 16DIL (=SCL4402)

STM32F401CCU6 32-bit Arm Cortex Development Board 


Board schematic can be found here.

MCU datasheet can be found here

Features:

• 256kB Flash and 64kB SRAM
• 84MHz Max. clock speed
• Arm Cortex-M4 32-bit RISC Processor with FPU
• SPI, I2C, I2S, USART and USB interfaces
• 1×12-bit, 2.4 MSPS A/D converter (up to 16 channels)
• Built-in RTC: subsecond accuracy, hardware calendar
• USB 2.0 full-speed device/host/OTG controller with on-chip PHY
• CRC calculation unit

STM32F411CEU6 32-bit Arm Cortex Development Board 


Board schematic can be found here.

MCU datasheet can be found here

Features:

• 512KiB Flash and 128KiB SRAM
• 100MHz Max. clock speed
• Arm Cortex-M4 32-bit RISC Processor with FPU
• SPI, I2C, I2S, USART and USB interfaces
• 1×12-bit, 2.4 MSPS A/D converter (up to 16 channels)
• Built-in RTC: subsecond accuracy, hardware calendar
• USB 2.0 full-speed device/host/OTG controller with on-chip PHY
• CRC calculation unit