The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.
Eagle Soldering Station 703.050 (SL30C) Professional 48W Temperature Controlled with Ceramic Soldering Iron with digital LED Display
Professional soldering station with numeric digital display of the temperature. The soldering iron incorporates a ceramic heating element assuring a highly accurate temperature setting and a fast heating time. The bit is directly fitted on the element to minimise thermal loss. The lead of the iron is made of heat-resistant silicone. The iron holder can be mounted on the right or the left side of the station.
Power 230VAC, 50Hz
48 Watts
Iron output 24Vac
Iron length 203mm
Temperature range 160 - 480 deg C
Weight 1.94kg
Lead length 1.15m
Dimensions:Station 170 x 116 x 96mm
Spare tips see S4H
Spare Soldering Iron see SIR30
Eagle Turbo 2 Tour Grade Microphone cable is a professional, flexible, heavy duty 2 core screened, noiseless microphone cable. Each core is made up of stranded copper conductors with colour coded insulation, cotton cord fillers, copper spiral lap screen shielding and a rubberised outer sheath for durability and flexibility. This flexible balanced microphone cable with a low bending radius uses sPVC for the outer sheath. XLPE (cross linked Polyethylene ) insulation on the inner cores provides superb electrical characteristics and will not melt or shrink back during soldering.
Cores: 2 x 0.22mm2 CSA
Overall diameter: 6.22mm
Length: 100m
Outer sheath material: sPVC
Eagle Turbo 2 Tour Grade Microphone cable is a professional, flexible, heavy duty 2 core screened, noiseless microphone cable. Each core is made up of stranded copper conductors with colour coded insulation, cotton cord fillers, copper spiral lap screen shielding and a rubberised outer sheath for durability and flexibility. This flexible balanced microphone cable with a low bending radius uses sPVC for the outer sheath. XLPE (cross linked Polyethylene ) insulation on the inner cores provides superb electrical characteristics and will not melt or shrink back during soldering.
Eagle Turbo 2 Balanced Twin Figure of 8 Flat Cable has been designed to be used on fixed and mobile installations where a high quality flat cable is required. Especially suitable for connecting two channel XLR connections in professional stage and studio operations. XLPE ( cross linked polyethylene ) insulation on the inner cores provides superb electrical characteristics and will not melt or shrink back during soldering.
Cores: 2 x 2 x 0.22mm2 CSA
Number of strands per core: 28 (0.1mm diameter each)
Length: 100m
Outer sheath material: sPVC
Eagle Turbo 2 Balanced Twin Figure of 8 Flat Cable has been designed to be used on fixed and mobile installations where a high quality flat cable is required. Especially suitable for connecting two channel XLR connections in professional stage and studio operations. XLPE ( cross linked polyethylene ) insulation on the inner cores provides superb electrical characteristics and will not melt or shrink back during soldering.
Cores: 2 x 2 x 0.22mm2 CSA
Number of strands per core: 28 (0.1mm diameter each)
Outer sheath material: sPVC
Electret Microphone Insert (Condenser Mic Insert). dimensions: 10 x 4.5mm. Impedance 300-1000 ohms. Freq response 50Hz to 12KHz. Works from 1-10VDC. Small battery will power this unit such as SG13S. 2 Solder Contacts on the back. Change 1K resistor to lower value for lower battery voltage.
Electret Microphone Insert (Condenser Mic Insert). dimensions: 11 x 7mm. Impedance 300-1000 ohms. Freq response 50Hz to 12KHz. Works from 1-10VDC. Small battery will power this unit such as SG13S. 2 Solder Contacts on the back. Change 1K resistor to lower value for lower battery voltage.