Ceramic Disc 63VDC 5% 2.5mm spacing 10pF

ALCAP High Voltage (100V) & Ripple Currents - High Quality Audio Bipolar Capacitors.

Reversible Electrolytic Axial Capacitor

Excellent for Crossover Units & Filters

10uF 100V. 10% Tolerance. 1300mA Ripple Current. Dimensions D10 x L29mm

10uF 100V Radial Electrolytic 105C High Temperature, Low Leakage, Tol ±20%

10uF 16V ELSM Surface Mount Electrolytic capacitor. High temperature 105degC, Low leakage.

Tantalum Bead capacitor. 10uF 16V

10uF 250V Radial Electrolytic 105C High Temperature, Low Leakage, Tol ±20%

10uF 25V Radial Electrolytic 105C High Temperature, Low Leakage, Tol 20%

10uF 35V ELSM Surface Mount Electrolytic capacitor. High temperature 105degC, Low leakage.

Tantalum Bead capacitor. 10uF 35V

10uF 400V Radial Electrolytic 105C High Temperature, Low Leakage, Tol ±20%

Axial Electrolytic Capacitor. Low leakage. 10uF 450V 13x31mm Ripple Current 85mA @ 120Hz

10uF 450V Radial Electrolytic 105C High Temperature, Low Leakage, Tol ±20%

10uF 450VAC Polypropylene Motor Run/Motor Start Capacitor 

6.3mm Lucar tags & Stud Mount. 50-60Hz. Self extinguishing case and cover. 

Tolerance ± 5%

Dimensions 35 x 66mm

10uF 500V Radial Electrolytic 105C High Temperature, Low Leakage, Tol ±20%.  10d x 30mm

Very Low Impedance (Low ESR), Long Life, Audio Electrolytics. High Ripple. 105 deg C 10uF 50V 5 x 11mm

Monlolythic Ceramic Capacitor 50V, Y5V dielectric. 5mm pitch 10uF

Axial Electrolytic Capacitor. Low leakage. 10uF 63V

10uF 63V Radial Electrolytic 105C High Temperature, Low Leakage,  Tol ±20%

Axial Miniature Inductor/RF Choke, Tolerance 10% 10uH

TDA2003A 10W Amplifier Kit

This kit uses a TDA2003 to create a small but powerful audio amplifier suitable for most uses. It works best with supply voltages between 8-18VDC and loads down to 2Ω.
Perfect for use with passive bookshelf speakers, or as a general purpose audio amplifier. 

The following components are included in this kit:

• Circuit Layout Diagram + Schematic x 1
• Volume (20kΩ LOG) potentiometer x 1 
• 1000µF 16V Capacitor x 1
• 470µF 25V Capacitor x 1
• 100µF 25V Capacitor x 1
• 10µF 25V Capacitor x 1
• 100nF Boxpoly Capacitor x 2
• 47nF Boxpoly Capacitor x 1
• 2W 1Ω Resistor x 1
• 2W 2.2Ω Resistor x 1
• Metal Film 220Ω Resistor x 1
• Metal Film 39Ω Resistor x 1
• PCB Terminal Blocks x 2
• PCB x 1
• TDA2003A IC x 1
   

Technical Specifications:

Input Voltage: 8-18VDC
Output Power: 10W @ R_L= 2Ω, 6W @ R_L= 4Ω
THD: 0.18% @ R_L= 2Ω, f = 1kHz
Efficiency: 65% @ R_L = 2Ω, f = 1kHz
Power Dissipation @ T_case = 90­°C: 20W 
Frequency Response: 40-15000Hz

Metal Film Resistor 1% Tolerance 1/4W 250V max 11 ohms. 10 pack

14 Watt 5% Wire-wound Resistor 11 ohms

11 Way Header Socket, 2.54mm Pitch

1 row of 11 pins 2.54mm (0.1") Pitch

Metal Film Resistor 1% Tolerance 1/4W 250V max 110 ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 110K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 11K ohms. 10 pack

12 Way Ceiling Speaker System - 6 x 200W

Fully featured, easy to install 12 speaker system with Bluetooth, media player, microphone and line audio input. Featuring 12 high quality, rubber surround ceiling speakers with ferrofluid-cooled adjustable silk dome tweeters for a high quality HiFi listening experience. These speakers have a high dispersion angle (155°), which helps distribuite sound over a large area without the need for additional speakers. 

This package includes: 12 x Adastra C6D ceiling speakers,  1 x Adastra A6 Mixer-Amp and 200 metres of white speaker cable. 

All our systems are bespoke; they are not pre-boxed kits; just phone 020 8452 0161 if you wish to change anything. 

Features: 

• Easy to install

• Built-in tone control allows you to tailor the sound to your taste and listening environment

• Microphone, USB, SD, Bluetooth, AUX and Line inputs make it easy to connect to your sound source

• USB and SD inputs can be controlled via the remote control

• HiFi ceiling speakers provide excellent audio quality, unlike many other ceiling speakers

• Input selector switch allows you to change the sound input without unplugging cables
   

Technical Specifications:

Amplifier: 

• Output power RMS @ 4Ω : 6 x 200W
• Amplifier class: Class D
• Microphone inputs: 2 x 6.3mm (1/4") mono jack
• Line inputs: 4 x RCA sockets (Line 1 & 2 ) + 2 x 6.3mm (1/4") mono jacks (Line 1)
• Line input sensitivity: 0.775V_RMS
• AUX input: 3.5mm (1/8") stereo jack
• AUX input sensitivity: 0.48V_RMS
• Bluetooth version: 2.3
• Line output: 6 x RCA
• Speaker outputs: 3 x 4 Terminal Pheonix (Euroblock) 
• FM Antenna connection: F-type socket
• THD + N: < 0.1%
• Output controls: 3 x Source select, Channel 1-6 Level
• Input controls: Aux, Media, Line1, Line2, Mic1, Mic2, Talkover
• Protection: Thermal, over-current, over-voltage, short-circuit
• Dimensions: 482 x 260 x 88mm
• Weight: 5.98kg
• Fuse: F5A, 250V 

Speakers:

• Power Max.: 100W
• Impedance: 8Ω
• Sensitivity @ 1W/1m: 85dB(±2dB)
• Cutout: 193mm dia.
• Mounting depth: 79mm
• Dimensions: 93 x 227mm 
• Frequency response: 60Hz - 20kHz

300mm Bass Speaker, for new designs or replacements of Pro Music, PA and General Purpose uses, with extended lower frequency range.

High Quality design from professional grade materials features a high temperature voice coil, ferrite magnet, treated paper cone, rolled cloth edge, Aluminium basket and gold plated push terminals for quick connection. 

• Coil Size 63.5mm

• Connectors: Gold Plated Push Terminals

• Max Diameter 305mm

• Impedance 8 ohms

• Magnet Weight: 50 Ounce - 1.42 kg

• Peak Music Power 350W

• Power RMS 250W

• Resonant Frequency 42Hz

• Sensitivity (dBV/Pa): 97