The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
+44 (0)20-84520161 Contact Us

Boxes & Enclosures

Products


  • ABS & Aluminium Instrument Case by Hammond 134 x 135 x 50mm

    ABS & Aluminium Instrument Case by Hammond 134 x 135 x 50mm

    Hammond ABS Instrument Enclosure with Aluminium End Plates: 134 x 135 x 50mm. Hammond Part No: 1598BSGY

    Key Features:

    • Modern low profile designed instrument enclosure.
    • Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves, front and rear.
    • Textured grey plastic top & bottom halves.
    • Molded in n Flame Retardant ABS plastic.
    • Front and rear panels are 1.6 mm brushed aluminum with protective paper on one side.
    • Easy access to interior via shell type construction.
    • Integral horizontal P.C. card mounts on Eurocard centers.
    • P.C. card standoffs molded into top & bottom half of enclosure - 


    Item Number: BALB
    £6.75 (inc VAT £8.10)
     
  • ABS & Aluminium Instrument Case by Hammond 180 x 155 x 52mm

    ABS & Aluminium Instrument Case by Hammond 180 x 155 x 52mm

    Hammond ABS Instrument Enclosure with Aluminium End Plates: 180 x 155 x 52mm. Hammond Part No: 1598CSGY

    Key Features:

    • Modern low profile designed instrument enclosure.
    • Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves, front and rear.
    • Textured grey plastic top & bottom halves.
    • Molded inn Flame Retardant  ABS plastic.
    • Front and rear panels are 1.6 mm brushed aluminum with protective paper on one side.
    • Easy access to interior via shell type construction.
    • Integral horizontal P.C. card mounts on Eurocard centers.
    • P.C. card standoffs molded into top & bottom half of enclosure - 


    Item Number: BALC
    £7.35 (inc VAT £8.82)
     
  • ABS & Aluminium Instrument Case by Hammond 160 x 160 x 86mm

    ABS & Aluminium Instrument Case by Hammond 160 x 160 x 86mm

    Hammond ABS Instrument Enclosure with Aluminium End Plates: 160 x 160 x 86mm. Hammond Part No: 1598ESGY

    Key Features:

    • Modern low profile designed instrument enclosure.
    • Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves, front and rear.
    • Textured grey plastic top & bottom halves.
    • Molded in ABS plastic.
    • Front and rear panels are 1.6 mm brushed aluminum with protective paper on one side.
    • Easy access to interior via shell type construction.
    • Integral horizontal P.C. card mounts on Eurocard centers.
    • P.C. card standoffs molded into top & bottom half of enclosure - 


    Item Number: BALE
    £8.95 (inc VAT £10.74)
     
  • ABS & Aluminium Instrument Case by Hammond 280 x 200 x 76mm

    ABS & Aluminium Instrument Case by Hammond 280 x 200 x 76mm

    Hammond ABS Instrument Enclosure with Aluminium End Plates: 280 x 200 x 76mm Hammond Part No: 1598JSGY

    Key Features:

    • Modern low profile designed instrument enclosure.
    • Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves, front and rear.
    • Textured grey plastic top & bottom halves.
    • Molded inn Flame Retardant ABS plastic.
    • Front and rear panels are 1.6 mm brushed aluminum with protective paper on one side.
    • Easy access to interior via shell type construction.
    • Integral horizontal P.C. card mounts on Eurocard centers.
    • P.C. card standoffs molded into top & bottom half of enclosure - 


    Item Number: BALJ
    £10.65 (inc VAT £12.78)
     
  • ABS Box 54 x 23 x 38mm

    ABS Box 54 x 23 x 38mm

    Black ABS Plastic Box with Screw-down lid. 54 x 23 x 38mm



    Item Number: ABS4
    £2.00 (inc VAT £2.40)
     
  • ABS Box 75 x 50 x 25mm

    ABS Box 75 x 50 x 25mm

    Black ABS Plastic Box with Screw-down lid. 75 x 50 x 25mm



    Item Number: ABS5
    £2.25 (inc VAT £2.70)
     
  • ABS Box 100 x 75 x 40mm

    ABS Box 100 x 75 x 40mm

    Black ABS Plastic Box with Screw-down lid. 100 x 75 x 40mm



    Item Number: ABS20
    £2.50 (inc VAT £3.00)
     
  • ABS Box 221 x 150 x 63mm

    ABS Box 221 x 150 x 63mm

    Black ABS Plastic Box with Screw-down lid. 221 x 150 x 63mm



    Item Number: ABS60
    £5.85 (inc VAT £7.02)
     
  • Waterproof Junction Box 100 x 100 x 50mm

    Waterproof Junction Box 100 x 100 x 50mm

    Junction Box for external (IP55) and internal use 100 x 100 x 50mm

    with snap-shut cover and 6 flexible cable 29mm entry holes. Knock out mounts on base. 4 stainless steel screws.



    Item Number: WBX100
    £4.35 (inc VAT £5.22)
    £5.25 , save 17%
  • Waterproof Junction Box 75 x 75 x 38mm

    Waterproof Junction Box 75 x 75 x 38mm

    Junction Box for external (IP55) and internal use 75 x 75 x 38mm

    with snap-shut cover and 7 flexible cable entry points. Knock out mounts on base and two mounting lugs. Case opens by inserting a small screwdriver into the edge slots. Light grey.



    Item Number: WBX75
    £2.95 (inc VAT £3.54)
     
  • Diecast Alum Box 80 x 55 x 21mm

    Diecast Alum Box 80 x 55 x 21mm

    High Quality, heavy duty diecast aluminium box. 

    Easy to drill for switches and sockets etc.

    For housing & screening electronic circuits.

    IP54 rating. 

    External Dimensions: 80 x 55 x 21mm



    Item Number: G100
    £4.50 (inc VAT £5.40)
     
  • Diecast Alum Box 89 x 25 x 26mm

    Diecast Alum Box 89 x 25 x 26mm

    High Quality, Heavy Duty Diecast Aluminium Box

    Easy to drill for switches and sockets etc. For housing & screening electronic circuits. IP54 rating. M3 Fixing screws Dims: 89 x 25 x 26mm

     



    Item Number: G102
    £3.95 (inc VAT £4.74)
     
  • Diecast Box 60 x 55 x 26mm

    Diecast Box 60 x 55 x 26mm

    High Quality, Heavy Duty Diecast Aluminium Box

    Easy to drill for switches and sockets etc. For housing & screening electronic circuits. IP54 rating. M3 Fixing screws Dims: L90 W55 H26mm



    Item Number: G104
    £4.50 (inc VAT £5.40)
     
  • Diecast Box 115 x 64 x 26mm

    Diecast Box 115 x 64 x 26mm

    High Quality, Heavy Duty Diecast Aluminium Box

    Easy to drill for switches and sockets etc. For housing & screening electronic circuits. IP54 rating. M3 Fixing screws Dims: 115 x 64 x 26mm 

     



    Item Number: G106
    £4.95 (inc VAT £5.94)
     
  • Diecast Box 115 x 64 x 51mm

    Diecast Box 115 x 64 x 51mm

    High Quality, heavy duty diecast aluminium box. 

    Easy to drill for switches and sockets etc.

    For housing & screening electronic circuits.

    IP54 rating. 

    External Dimensions:115 x 64 x 51mm



    Item Number: G111
    £5.65 (inc VAT £6.78)
     
  • Diecast Box 115 x 90 x 51mm

    Diecast Box 115 x 90 x 51mm

    High Quality, heavy duty diecast aluminium box. 

    Easy to drill for switches and sockets etc.

    For housing & screening electronic circuits.

    IP54 rating. 

    External Dimensions: 115 x 90 x 51mm 



    Item Number: G113
    £5.95 (inc VAT £7.14)
    £8.50 , save 30%
  • Diecast Box 222 x 146 x 51mm

    Diecast Box 222 x 146 x 51mm

    High Quality, heavy duty diecast aluminium box. 

    Easy to drill for switches and sockets etc.

    For housing & screening electronic circuits.

    IP54 rating. 

    External Dimensions: 222 x 146 x 51mm



    Item Number: G116
    £12.50 (inc VAT £15.00)
     
  • Diecast Box 171 x 121 x 51mm

    Diecast Box 171 x 121 x 51mm

    High Quality, heavy duty diecast aluminium box. 

    Easy to drill for switches and sockets etc.

    For housing & screening electronic circuits.

    IP54 rating. 

    External Dimensions: 171 x 121 x 51mm



    Item Number: G120
    £15.50 (inc VAT £18.60)
     
  • Potting Box 30 x 20 x 15mm

    Potting Box 30 x 20 x 15mm

    ABS Potting Box. (Lidless). Shaped like a matchbox without cover.30 x 20 x 15mm 



    Item Number: PX1
    £0.25 (inc VAT £0.30)
     
  • Potting Box 40 x 40 x 20mm

    Potting Box 40 x 40 x 20mm

    ABS Potting Box. (Lidless). Shaped like a matchbox without cover.40 x 40 x 20mm



    Item Number: PX2
    £0.60 (inc VAT £0.72)
     
  • Potting Box 50 x 50 x 30mm

    Potting Box 50 x 50 x 30mm

    ABS Potting Box. (Lidless). Shaped like a matchbox without cover.50 x 50 x 30mm



    Item Number: PX3
    £0.70 (inc VAT £0.84)
     
  • Potting Box 75 x 50 x 30mm

    Potting Box 75 x 50 x 30mm

    ABS Potting Box. (Lidless). Shaped like a matchbox without cover.75 x 50 x 30mm



    Item Number: PX4
    £0.90 (inc VAT £1.08)
     
  • Potting Box 100 x 60 x 25mm

    Potting Box 100 x 60 x 25mm

    ABS Potting Box. (Lidless). Shaped like a matchbox without cover.100 x 60 x 25mm



    Item Number: PX5
    £0.90 (inc VAT £1.08)
     
  • Two Tone Enclosure 120 x 60 x 40mm

    Two Tone Enclosure 120 x 60 x 40mm

    Attractive, Two Tone Grey, High Density Polystyrene Enclosure. Two part tongue and groove joint between top and bottom case with slotted end panels. Internal guide-slots for PCBs. Mounting holes & lid fixing screws are outside the sealing area, preventing mposture & dust ingress. Dims: L120 W60 H40 mm



    Item Number: G410
    £5.95 (inc VAT £7.14)
     

Bestsellers