Hammond Diecast Aluminium Box 115 x 64 x 26mm

X2 Rated Polypropylene Mains Capacitor 305VAC 1uF (1uF) 27.5mm pitch.

Items may differ to the generic Illustration.

Note: 305VAC replace the old 275V X2 rated capacitors

6V 100mA Positive Voltage Regulator TO92.

Hammond Manufacturing Black ABS Plastic Box with Screw-down lid. 109 x 81 x 41mm

Hammond Part no.: 1591XXSSBK

50uF + 50uF 500V Dual Capacitor for Valve (Tube) Amplifiers Tol ±20%

Also suitable for other valve equipment including radios, radiograms, tape recorders, etc

35mm dia x 75mm h. 3 Solder tags. Common earth. Shiny new stock

Parallel the positives to get 100uF 500V

470nF (0.47uF) 630V Axial Polyester Capacitor Suitable for Hi Fi Audio. 10% Tolerance

Miniature Toggle Switch DPDT Double Pole Changeover 250V 3A. 36 x 14 x 14mm

High quality switch with silver contacts

M6 6mm Nut. Solder tabs.

Miniature Push to BREAK. Release to MAKE 125VAC 500mA, With 2 Solder Tags.

Dimensions 27.5mm long, 9.7mm diameter. 7mm nut. Red Button

22 mteres of Solid Core 1/0.6mm.Hook-up wire pack of 11 different coloured 2 metre lengths, each 

Solid copper conductors. Overall diameter of each wire: 1.4mm, rated up to 1000V @ 1.8 Amps

Will keep shape when bent.

Withstands the high voltages of valve equipment and wiring tag-boards, & tag strips & other point to point wirings.

 Colours may vary

Guitar Fuzz Effects Pedal Kit

This kit is based on the legendary fuzz face pedal. Instead of germanium transistors, it uses newer, more commonly available NPN silicon transistors to give you a harsh and sharp fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building.
 

The following components are included in this kit:

• Circuit Layout Diagram + Schematic x 1
• Volume (500kΩ LOG) and fuzz (5kΩ LIN) potentiometers x 1 each
• BC108C and BC183C Transistors x 1 each
• CPB10N Boxpoly 10nF Capacitor x 1
• 2.2µF Electrolytic Capacitor x 1
• 22µF Electrolytic Capacitor x 1
• 330Ω Metal Film Resistors - Pack of 10
• 33kΩ Metal Film Resistors - Pack of 10
• 100kΩ Metal Film Resistors - Pack of 10
• 8.2kΩ Metal Film Resistors - Pack of 10
• 6.3mm (1/4") Open Jack Socket x 2
• PP3 9V Battery Snap x 1
• DPDT Latching Footswitch x 1
• 9x25 Stripboard x 1

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to use an enclosure)