NMOS TO92 DGS N Channel MOSFET 60V 500mA 3R5 13nS
9-10 Watt 5% Wire-wound Resistor 1.2K ohms
16mm Single Control Pot with knurled & Slotted 6mm dia spindle. PCB Pins 5mm spacing. 10K Log
Battery Holder for 4 X AA Batteries in series. Side by side with PP3 Clips. All connected in series to give 6V total.
5V 1.5A Positive Voltage Regulator TO220.
Very Low Impedance, Long Life, Audio Electrolytics. High Ripple. 105 deg C 1000uF 25V 12.5 x 20mm
High Quality PVC Insulating Tape. 20 metres long, 19mm wide. BS Standards: BS3924, BS3887, IEC 60454. With Adhesive. Suitable for insulation. Flame retardant properties. Black
Arduino compatible board with the ATMEGA328P microcontroller
The Arduino Nano is a small, breadboard-friendly version of the Arduino UNO. It has the same functionality as the Arduino Duemilanove at a much smaller size. The Arduino Nano is well-suited for rapid prototyping and as a great general-purpose microcontroller.
Since Arduino is "Open Source" hardware & software, anyone can copy the Arduino Nano boards exactly, even using original parts. This means we are able to supply this Arduino compatible board at a fraction of the cost of the original but still working identical to the original.
Variable Input Voltage (7-12V)
Indicator LEDs for immediate feedback
Compact Form Factor (45mm x 19mm)
14 Digital I/O pins
8 Analog I/O pins
16 MHz clock speed
32kb flash memory (of which 2kb is used by the bootloader)
Software can be downloaded from the Arduino website here
Solderless Male to Female Jumper Leads in a set of 40
This set of coloured male to female jumper leads can be used togerher or pealed appart into smaller sets or single leads. They are great for prototyping with boards like Arduinos and the Raspbery Pi. With 10 different colours and four of each colour keeping track of what is connected to what nice and easy for quick fault finding.
Colours: Red, Orange, Yellow, Green, Blue, Grey, Purple, Brown, Black and White
Login to post a review