BMS 2S Balanced Charger for 2 x 3.7V Lithium batteries with protection

Details
Recommended
Send

View Detailed Images 2

Details

Item Number

BMS2S

Item Condition

New

Price

£3.00 (inc VAT £3.60)

Options

Quantity

7 Segment Red LED Ultra-Bright Common Anode 14mm Display

7 Segment Display Common Anode Ultra Bright Red 14mm (0.56") 5600mcd.

Z140RA

£2.75

40 Male to Female Jumper Cables on rainbow ribbon cable

Solderless Male to Female Jumper Leads - set of 40

This set of coloured male to female jumper leads can be used intact, or peeled appart into small sets or single leads. Great for prototyping with Arduino, Raspbery Pi and other projects

Keep track easily with 10 different colours for quick fault finding.

4 of each: Red, Orange, Yellow, Green, Blue, Grey, Purple, Brown, Black and White

Each length: 200mm

JL40

£3.25

Line tracking sensor module for Arduino KY-033

Line tracking sensor module for Arduino and other microcontroller projects

This module uses an IR transmitter and receiver that will detect how reflective the surface is in front of the module. It has a potentiometer to adjust the sensitivity of the module so it can detect if the surface is black or white.

Voltage : 5VDC

Size : 40x12mm

KY033

£2.50

Double 18650 Battery Holder with Wires

Battery Holder for 2 x 18650 Battery.

150mm Insulated Wires

BH186502

£2.25

BMS Charger for 3.7V Lithium battery with protection

1S BMS (Battery Management System) for use with a single cell 3.7v Lithium battery

This BMS is designed to charge and manage the use of a lithium battery. It will manage the charging when used with an apropriate constant current power supply for the battery. It will also protect the battery from both over voltage and under voltage. It also features over current and short circuit protection.

This BMS will charge 1 lithium battery like 18650 or 26650. It will also charge 1S LiPo (Lithium Polymer) battery packs.

A constant voltage/current power source is needed to properly use this BMS like the BCD5A or BCD9A

Voltage in : 4.2V - 5VDC

Over Voltage Protection : 4.2VDC

Under Voltage Protection : 2.75VDC

Maximum Charging Current : 2A

Maximum Discharging Current : 2A

Over Current Protection : 3A

Dimensions : 30mm x 3.8mm

BMS1S

£2.50

BMS 3S Balanced Charger for 3 x 3.7V Lithium batteries with protection

3S Balanced BMS (Battery Management System) for use with 3 x 3.7v Lithium batteries

This BMS is designed to charge and manage the use of 3 lithium batteries. It will manage the balanced charging when used with an apropriate constant current power supply for the batteries. It will also protect the battery from both over voltage and under voltage. It also features over current and short circuit protection.

This BMS will balance charge 3 lithium batteries like 18650 or 26650 or can charge multiple sets of 3 in paralel for higher capacity/current uses. It will also balance charge 3S LiPo (Lithium Polymer) battery packs.

A constant voltage/current power source is needed to properly use this BMS like the BCD5A or BCD9A

Voltage in : 12.6V - 13.6VDC

Over Voltage Protection : 4.2VDC per cell

Under Voltage Protection : 2.5VDC per cell

Maximum Charging Current : 20A

Maximum Discharging Current : 40A

Over Current Protection : 80A

Dimensions : 60mm x 41mm

BMS3S

£4.50

BMS 4S Balanced Charger for 4 x 3.7V Lithium batteries with protection

4S Balanced BMS (Battery Management System) for use with 4 x 3.7v Lithium batteries

This BMS is designed to charge and manage the use of 4 lithium batteries. It will manage the balanced charging when used with an apropriate constant current power supply for the batteries. It will also protect the batteries from both over voltage and under voltage. It also features over current and short circuit protection.

This BMS will balance charge 4 lithium batteries like 18650 or 26650 or can charge multiple sets of 4 in paralel for higher capacity/current uses. It will also balance charge 4S LiPo (Lithium Polymer) battery packs.

A constant voltage/current power source is needed to properly use this BMS like the BCD5A or BCD9A

Voltage in : 16.8V - 18.1VDC

Over Voltage Protection : 4.2VDC per cell

Under Voltage Protection : 2.5VDC per cell

Maximum Charging Current : 20A

Maximum Discharging Current : 40A

Over Current Protection : 80A

Dimensions : 60mm x 45mm

BMS4S

£5.50

Pair of Modular 18650 Battery Holder for Battery Packs

Pair of Battery Holder Clips for 18650 Batteries.

These clips are designed to safely hold single or multiple 18650 batteries in place to make a custom battery pack. They interlock together while keeping the required air space between each cell to prevent overheating of the pack.

You will get a Pair of clips that will be hold 1 battery.

BC18650

£0.50

TO-92 Transistor Kit 600 Pieces

600-Piece TO-92 Transistor Kit in a Handy Carrying Case.

This transistor kit comes with 15 different transistor types.
40 pieces per transistor of the following types:

2N2222, 2N3904, 2N5401, 2N5551, 2SA1015, 2SC1815, 2SC945, S8050, S8550, S9012, S9013, S9014, S9015, S9018

TRK600

£10.50

Send to Friend

Your name:	*
Your email:	*
Recipient's email:	*
Add a personal message
Image verification
Type the characters you see in the picture:
	*

2S Balanced BMS (Battery Management System) for use with 2 x 3.7v Lithium batteries

This BMS is designed to charge and manage the use of 2 lithium batteries. It will manage the balanced charging when used with an apropriate constant current power supply for the battery. It will also protect the battery from both over voltage and under voltage. It also features over current and short circuit protection.

This BMS will balance charge 2 lithium batteries like 18650 or 26650 or can charge multiple pairs in paralel for higher capacity/current uses. It will also balance charge 2S LiPo (Lithium Polymer) battery packs.

A constant voltage/current power source is needed to properly use this BMS like the BCD5A or BCD9A

Voltage in : 8.4V - 9VDC

Over Voltage Protection : 4.2VDC per cell

Under Voltage Protection : 2.75VDC per cell

Maximum Charging Current : 10A

Maximum Discharging Current : 20A

Over Current Protection : 20A

Dimensions : 48mm x 20mm