|Now FREE Delivery on UK mainland orders over £30+VAT|
IC Dual Bidirectional Motor Driver 12pins of 16DIL
Crimp Connector Red Insulated Splice Break-out Connector, For 0.8 - 2mm Priced per pack of 10
You can "break" into an existing wire and join another wire to it, leaving the joints insulated.
Power Supply Board for Breadboard
This PSU board is designed to fit directly on to a standard breadboard such as our BB400T and BB830. to give 2 power rails, 5V or 3.3V, Rail voltages are switch selectable. It can powered by 7-12V at the DC socket or 5V via the micro USB socket.
Voltage in : 5VDC Via USB or 7-12VDC
Max Current : 700mA
Soil hygrometer module with digital and analogue outputs for Arduino and other microcontroler projects
This module has a seperate 2 pronged moisture detector that is inserted into the soil and then connected to the comparitor board using the supplied link wires. It can give out a digital (High/Low) signal at a certain moisture level that can be set by adjusting the potentiometer on the board. There is also an analogue output to give you a more precise reading of the moisture level in the soil.
Voltage : 3.3 to 5VDC
Comparitor PCB Size 30x16mm
Infrared IR remote control and receiver kit for Arduino and other microcontroler projects
This kit comes with a simple battery powered infra red remote control, a matching IR receiver modual (KY-022) and a 5mm IR transmitter all working on at 38kHz. This kit can be combined with many other projects to add remote control to them.
Battery : CR2025
Voltage : 5VDC
Clear Acrylic enclosure for Arduino UNO R3 Board
This custom made box for the Arduino Uno R3 is a simple 2 piece snap together case. It has all the cutouts needed to alow easy connectiion of the power, USB and all the pinheaders. There is also a built in reset button extension to alow easy resetting of the Arduino with a press of the finger (many other cases just have a hole above the reset button). The case will hold the Arduino solidly in place inside without needing you to use any screws. It also has vents on the underside and mounting holes so you can fix the case to a surface.
75mm x 60mm x 17mm
Login to post a review
Leak & Spill Proof. ABS plastic case & cover. Can be used in multiple positions. Improved electrolyte never needs watering. Lucar (Spade) Terminals Dimensions: 151 X 65 X 95mm