NPN TO220 150V 8A 50W Hi Fi Driver. Complement to MJE15031

NPN TO220 250V 8A 50W Hi Fi driver. Complement to MJE15033

PNP TO220 250V 8A 50W Hi Fi Driver. Complement to MJE15032

PNP TO5 250V 1A 15MHz

Monacor 4 Inch 8 Ohm High-End Midrange Speaker 50W RMS 100W MAX.

• 100 mm (4") midrange speaker
• Further development of the classic speaker MSH-115
• Specialised for reproduction of the important midrange
• Diecast basket and rear-ventilated centering spider for minimum mechanical loss
• High-quality, low-resonance paper cone
• Wide and linear radiation range
• Also ideally suited for application in small satellite systems with subwoofer support

Technical Specifications:

Impedance (Z): 8 Ω

Frequency range: fx-8,000 Hz

Resonant frequency: (fs) 89 Hz

Power rating (RMS): 50 W

Peak music power output (MAX): 100 W SPL 87 dB/W/m

Suspension compl. (Cms): 0.5 mm/N

Moving mass (Mms): 5.8 g

Mech. Q factor (Qms): 3.26

Electr. Q factor (Qes): 0.66

Total Q factor (Qts): 0.55

Equivalent volume (Vas): 2.2 l

DC resistance (Re): 5.8 Ω

Force factor (BxL): 5.35 Tm

Voice coil induct. (Le): 0.53 mH

Voice coil diameter: Ø 25 mm

Voice coil former: aluminium

Linear excursion (XMAX): ± 3 mm

Eff. cone area (Sd): 55 cm2

Magnet weight: 230 g

Magnet diameter: Ø 72 mm

Mounting cutout: Ø 97 mm

Mounting depth: 59 mm

Mounting hole diameter: Ø 108 mm

Dimensions: Ø 116 mm x 64 mm

Outside diameter: Ø 116 mm

Width: Ø 116 mm Depth 64 mm

Colour: black

Admiss. ambient temperature: 0-40 °C

Weight: 0.67 kg

NMOS 211 125V 16A 300W. Typical Output Power 150W @ 175MHz 13dB

Genuine Motorol

Only one left

NPN TO5 35V 150mA 750mW@470MHz

Genuine Motorola

Diode Wire-ended 1A 150V 25nS

Diode Use -> MBR1545CT

6.5cm High Frequency Piezo Horn Driver 150W Max
For use with reflector horns fitted with 1.375" (1 3/8") thread.

Crossover or capacitor not needed, due to high frequency only response.
Recommended to use a 10W protection resistor in series, around 33 ohms

Frequency response: 3,000Hz to 30,000Hz

Impedance: 1000 ohms @ 1,000Hz

Power max: 150W

SPL @ 1W/1m: 93dB

Dimensions: 75 x 65mm

Weight 95g

Piezo Tweeter
High efficiency piezo-electric high impedance tweeter that doesn't need a cross-over capacitor.

Clean & crisp reproduction of  high frequencies. Can be used in series with 10W 33ohm resistor for protection, but will work perfectly without.

Power max: 150W
Frequency response: 4kHz - 30kHz
Impedance @ 1kHz: 1k ohms
Impedance @ 25kHz: 60 - 80 ohms
Dimensions: 85 x 85 x 70mm

Energy Efficient UK Switch-mode Variable Voltage Universal Power Supply 1500mA

 Plug in Power Supply with Various Tips & Voltages:: 3V, 4.5V,  6V, 7.5V, 9V & 12V all at full rated output of 1500mA
 

• Energy Efficient
• Short circuit protection
• Overheating protection
• Overload protection
• Overcurrent protection

All voltages are regulated & selected by a small rotary switch:

UK mains plug. Can operate from 100VAC to 240VAC 50/60Hz

Adaptor plugs    3.5mm jack, 2.35 x 0.75mm, 3.5 x 1.35mm, 4 x 1.7mm, 5 x 2.1mm, 5.5 x 2.1mm, 5.5 x 2.5mm, 6.3 x 3mm

UK Approvals

Cable length 1.8m

Full UK  & EU Approvals

CE, Haus, Quader, WEEE, BS1363

Polyimide Film Tape 15mm x 27m

This polyimide film tape is stable across a wide range of temperatures (-70°C to 280°C).


Specifications:

Width: 15mm
Length: 27m
Thickness: 0.055mm
Tensile Force: ≥ 42N/25mm
Peeling Force: ≥ 26N/25mm

Soundlab Titanium Super Bullet Tweeter 150W RMS L050AR

Professional quality tweeter with heavy die-cast aluminium housing fitted with powerful high temperature Titanium voice coil.

Features:
Diecast Aluminium Frame
High Temp Titanium Voice Coil
Max Power: 300W
RMS Power: 150W
Impedance: 8 ohms
Magnet Weight 20 oz
Voice Coil 44mm (1 3/4 inch)
Freq Response 1.5KHz - 20KHz
Weight: 726 grams
Dimensions: 100 x 100 x 78mm

NMOS TO220 N Channel MOSFET 150V 50A 250W 0R035

IC Voltage to Frequency & Frequency to Voltage Converter 8DIL

IC Voltage to Frequency & Frequency to Voltage Converter 8DIL

Rean Black Plastic Knob with Blue Insert and White marker line. Push-on fitting for 6mm splined shaft

Rean Black Plastic Knob with Green Insert and White marker line. Push-on fitting for 6mm splined shafts.

Rean Black Plastic Knob with Light Grey Insert and marker line. Push-on fitting for 6mm splined shafts.

Rean Black Plastic Knob with Red Insert and marker line. Push-on fitting for 6mm splined shafts.

Rean Black Plastic Knob with Yellow Insert and marker line. Push-on fitting for 6mm splined shafts.

adastra RH15V Rectangular Horn Speaker 100V - IP65 rating

A PA horn speaker with 100V transformer offering several different power settings.

Moulded from high impact ABS for maximum protection against damage. Reflex loading and a rectangular flared aperture ensures efficient and directed sound delivery over large areas.

Durable and weatherproof to IP65

Dimensions: 312 x 255 x 152mm

• Rotary 100V tapping switch
• IP ratingIP66
• 15W Max 23W rms
• Freq response: 275Hz to 7KHz
• 100V Line Tappings: 2.5, 5, 10 & 15W
• Impedances: 4, 2, 1K & 670 ohms
• SPL rated power: 118dB
• Weight 1.48kg

Double Diode TO220 Super Barrier 10A total, 150V vF=0.6V typ Cathode is centre pin.

SFP101N15P Complete Optical Pick Up CD Laser & Mechanism 15 pins

Laser Pickup & Motor with 15 pin connector

SG13S, LR44, RW42, AG13, SR44, 1154, LR1154, SR1154 Silver Oxide Button Cell  1.55V High Capacity.

Typically for watches & calculators and miniature equipment 11.6 X 5.4mm. Equivalent to 228, 357, 501, 541, Timex J, LR44, PX67A, RW82, 1126, 1168, D76, S76, G13, LR55, RW42, AG13, SR44, 1154, L1154, LR1154. Mainly for Larger watches, Clocks, Toys, Weather stations, Microphones etc.

Note: Battery Iilustrations are for identification only. Type number and manufacturers may vary. All batteries are high quality brands