6VA 15+15V. Clamp type Laminated Transformer. Single Primary 230-240V

Put secondaries in parallel for full current or series to double voltage at half the current

Size W45xH36xD38mm FC54mm.

Red Top 15mm Knob For Splined 6mm Spindle

Diameter: 15mm
Height: 17mm
Inner Hole Diameter: 6mm

Green Top 15mm Knob For Splined 6mm Spindle

Diameter: 15mm
Height: 17mm
Inner Hole Diameter: 6mm

Blue Top 15mm Knob For Splined 6mm Spindle

Diameter: 15mm
Height: 17mm
Inner Hole Diameter: 6mm

Hammond 1598BSGY ABS Instrument Enclosure with Aluminium End Plates: 134 x 135 x 50mm

• Modern low profile designed instrument enclosure.
• Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves, front and rear.
• Textured grey plastic top & bottom halves.
• Molded in n Flame Retardant ABS plastic.
• Front and rear panels are 1.6 mm brushed aluminum with protective paper on one side.
• Easy access to interior via shell type construction.
• Integral horizontal P.C. card mounts on Eurocard centers.
• P.C. card standoffs molded into top & bottom half of enclosure - 

Orange Top 15mm Knob For Splined 6mm Spindle

Diameter: 15mm
Height: 17mm
Inner Hole Diameter: 6mm

Hammond 1598CSGY ABS Instrument Enclosure with Aluminium End Plates: 180 x 155 x 52mm 

• Modern low profile designed instrument enclosure.
• Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves, front and rear.
• Textured grey plastic top & bottom halves.
• Molded inn Flame Retardant  ABS plastic.
• Front and rear panels are 1.6 mm brushed aluminum with protective paper on one side.
• Easy access to interior via shell type construction.
• Integral horizontal P.C. card mounts on Eurocard centers.
• P.C. card standoffs molded into top & bottom half of enclosure - 

Monacor Bass Reflex Tube 57mm Diameter 215mm Length

Yellow Top 15mm Knob For Splined 6mm Spindle

Diameter: 15mm
Height: 17mm
Inner Hole Diameter: 6mm

Citronic PPX300 150W+150W RMS 19" Rackmount 2U Power Amplifier 

White Top 15mm Knob For Splined 6mm Spindle

Diameter: 15mm
Height: 17mm
Inner Hole Diameter: 6mm

Hammond 1598ESGY ABS Instrument Enclosure with Aluminium End Plates: 160 x 160 x 86mm.

• Modern low profile designed instrument enclosure.
• Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves, front and rear.
• Textured grey plastic top & bottom halves.
• Molded in ABS plastic.
• Front and rear panels are 1.6 mm brushed aluminum with protective paper on one side.
• Easy access to interior via shell type construction.
• Integral horizontal P.C. card mounts on Eurocard centers.
• P.C. card standoffs molded into top & bottom half of enclosure - 

Speaker Grill. Powder Coated Steel with Rubber Edging for 15 inch speaker (380mm)

Rean-Neutrik NYS215 6.3mm (1/4 inch) stereo chassis socket

Plastic PCB mount switched socket with Chrome nut with 6 PCB tails.

High Quality Toggle Switch with Metal Dolly On/Off/On (DPDT Centre Off).

Rated at 250VAC 10A / 125VDC 15A 12.2mm cut-out/nut. Contact Resistance 50 milliohms max

Dims: Total Height (Toggle Tip to Tags Ends): 59mm, Width: 15.7mm. Length: 29.2mm

Accepts 6.3mm Crimp Terminals holes to enable soldering.

ROHS Compliant

Soundlab 100W Piezo Tweeter Top Box with 6 Square Tweeters P115CP

Black Carpet Covered Cabinet with 6 x 80mm Tweeters.
Impedance: Piezo Tweeters Match with 4 ohm 8 ohm  & 16 ohm Speakers
Sensitivity: 90dBV/Pa
Frequency Response: 1-20KHz
Power: 100W max, 50W RMS
Input: ¼ inch 6.35mm Jack 
Output Link: ¼ inch 6.35mm Jack
Dimensions 265 x 500 x 140mm
Weight: 3.4Kg

Polyester Stacked Foil Capacitor, low Inductance, 7.5mm pin spacing, 5% Tolerance. EPCOS (Was Siemens) 1.5nF 250V (0.0015uF, 1500pF)

1.5nF (1500pF) 630V Axial Polyester Capacitor Suitable for Hi Fi Audio.10% Tolerance

9-10 Watt 5% Wire-wound Resistor 0.15 ohms

 resistors may vary from Illustrations

Polyester Stacked Foil Capacitor, Low Inductance, 7.5mm pin spacing, 5% Tolerance. EPCOS (Was Siemens) 1.5nF (0.11500pF) 100V

X2 Rated Polypropylene Mains Capacitor 305VAC 150nF (0.15uF) 22.5mm pitch

Items may differ to the generic Illustration.

Note: 305VAC replace the old 275V X2 rated capacitors

High Quality 4K HDMI to HDMI Lead, version 2.0, 15 metres long

SCR Thyristor TO220  DISCONTINUED - You could try TIC116N as a possible equivalent.

150 Metre Ultra High Speed 4K UHD Active Fibre Optic HDMI 2.0 Leads

• Support video resolutions up to 4K Ultra High Definition @ 60Hz
• Sleek high quality alloy headshells with gold plated connectors (only 19mm wide and 9mm high)
• 4.8mm outer diameter fibre optic cables provide flexibility over long distances without signal loss
• HDMI v2.0 4K & HDCP 2.2 compliant
• Video bandwidth up to 18Gb/s @60Hz

Ceramic Capacitor 3KV 150pF

Thermal Fuse. 155 deg C. 240VAC 10A

Switchmode Flat (Regulated) Power Supply. 15VDC (Single voltage) 5 Amps.

Complete with mains lead with 3 pin UK mains plug

5.5 x 2.1mm (Centre Positive) output plug. 

Suitable for many different aplications including 12-24v amplifiers 

Diode WE 200mA 50V 4nS