Battery holder for single N cell. 13.5 x 35mm approx. 14mm PCB pins.

Fits N cells, MN21, GP23A, VR22, A22, A23, LN08, L1028 etc

IC Pusle Width Modulator Controller for Battery Chargers & Power Supplies Low Standby Current. 8DIL

PNP TO1 Germanium 30V 500mA 50min@25mA. 

Diode Germanium TO1 100mA 30V Vf=0.1V Fast. Red dot=Cathode

Very old stock from around 1958. Mullard make - Good working stock - desoldered from equipment.

Great for Guitar & Music Pedals!

SCR Thyristor TO92 400V 800mA 200uA gate

P1000M Diode Wire Ended 10A 1000V also known as 10A10 

NMOS F220 600V 10A 35W 0R65 with Zener protection

P6010 (6A10) Diode Wire Ended 6A 1000V marking: 6A10

NMOS TO220 100V 80A 300W 0R012

Black Tough Plastic 7mm Cable Clips with Hardened Nails

7mm Round 100 pack.

Suitable for cable 6-7mm diameter

Cable Clips Grey, Tough Nylon with Hardened Nails 6mm x 10mm Flat 100 pack. Ideal for Mains 2.5 twin and earth or RG59 with power (Shotgun) CCTV cable.

Cable Clips White, Tough Nylon with Hardened Nails 5mm Round 100 pack

Cable Clips White, Tough Nylon with Hardened Nails 6mm Round 100 pack

Cable Clips White, Tough Nylon with Hardened Nails - 7mm Round 100 pack

Photointerrupter module for Arduino and other microcontroller projects

IC MCU 1K EEPROM 36 RAM 10MHz 18DIL

High Definition 2.MP 1080P Camera Inside a innocent looking dummy PIR Housing with Invisible Night Vision IR LEDs (no red glow) 

High quality 2.1MP 1080P High Definition 4in1 (AHD,TVI,CVI and CVBS) camera in a PIR housing.

Fitted with 940nm IR LEDs that are totally invisible with no red glow. Ideal for surveillance in indoor areas without arousing suspicion.

Athough this is a high definition camera, we can set it for older 720P or non-HD older DVRs if you contact us on 020 8452 0161.

Specifications:

Image Sensor: 1/2.9" Sony Exmor IMX323 CMOS Sensor
DSP: Fulham FH8536E
Resolution: 2.0 Megapixel, 1920(H)×1080(V) 1080P
Lux: 0.01 (0 Lux with IR on)
Lens: Fixed 3.7mm Pinhole with IR Cut
Power Requirements: 12VDC 1Amp max.
Noise Reduction: 2D & 3D
Shutter: 1/50-1/100,000
Infra-red Source: 49pcs 960NM (Invisible to the human eye) IR LEDs
Terminations: Flying Leads with BNC (Video) & DC (Power) Sockets
Operating Temperature: -10 to +55 C
Size: W69mm x H118mm x D47mm

High Quality UHF Plug with 10mm cable entry

Accepts RG213 cable for example.

Solder centre pin and twist/hold screen by screw-thread

High Quality Plug in Power Adaptor, Power Supply with 8 tips 3, 4.5, 6, 7.5, 9, 12V at 1000mA

Energy Efficient. Short circuit Protection, Overheating Protection, Overloading Protection & Overcurrent Protection

All voltages are regulated & selected by a small rotary switch:

Voltages: 3V, 4.5V,  6V, 7.5V, 9V & 12V all at full rated output of 1000mA

UK mains plug. Can operate from 100VAC to 240VAC 50/60Hz
Adaptor plugs    3.5mm jack, 2.35 x 0.75mm, 3.5 x 1.35mm, 4 x 1.7mm, 5 x 2.1mm, 5.5 x 2.1mm, 5.5 x 2.5mm, 6.3 x 3mm

Cable length 1.8m

Full UK  & EU Approvals

CE, Haus, Quader, WEEE, BS1363

Excellent Value!!! Fuse Kit of 100 Fast Blow 20mm Glass Fuses

10 each of 10 Different Values, 10 of each of  0.2A, 0.5A, 1A, 2A, 3A, 5A, 8A, 10A, 15A, 20A

NPN TO3 Line Output/Switchmode

IC Bucket Brigade Delay Line 8DIL

NiMH Rechargeable Battery. AA with Solder Tags 1.2V 1100mAH 14.5 x 50mm

Low-self-discharge NiMH battery (ready-to-use), 1.2 V

Goobay "ready to use" NiMH rechargeable batteries are pre-charged and can be used immediately. In addition to the low self-discharge rate, they are also environmentally friendly, because they can be recharged up to 1000 times.

After 12 months, the cells still have 80% of the pre-charged capacity.

NiMH Rechargeable Battery. AAA with Solder Tags 1.2V 1100mAH 10 x 44mm

Many can be soldered together to make multi-battery packs.

Industrial Quality 

Illustration may be Vary from the product

NiMH Rechargeable Battery. 1.2V 1000mAH 16.8 x 28mm.

Generally used as a backup battery - amongst other uses

adastra RH15V Rectangular Horn Speaker 100V - IP65 rating

A PA horn speaker with 100V transformer offering several different power settings.

Moulded from high impact ABS for maximum protection against damage. Reflex loading and a rectangular flared aperture ensures efficient and directed sound delivery over large areas.

Durable and weatherproof to IP65

Dimensions: 312 x 255 x 152mm

• Rotary 100V tapping switch
• IP ratingIP66
• 15W Max 23W rms
• Freq response: 275Hz to 7KHz
• 100V Line Tappings: 2.5, 5, 10 & 15W
• Impedances: 4, 2, 1K & 670 ohms
• SPL rated power: 118dB
• Weight 1.48kg