The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
+44 (0)20-84520161 Contact Us
Now FREE Delivery on UK mainland orders over £30+VAT

Products Map

Products Map

  • NKT677F Transistor

    NKT677F Transistor

    PNP TO7 Germanium 12V 10mA 40MHz Genuine Old Unused Stock


    Item Number: NKT677F
    £7.00 (inc VAT £8.40)
     
  • NKT713 Transistor

    NKT713 Transistor

    NPN TO1 Germanium 15V 500mA 50min@50mA



    Item Number: NKT713
    £7.00 (inc VAT £8.40)
     
  • NKT717 Transistor

    NKT717 Transistor

    NPN Germanium TO1 30V 150mA 40-150@50mA. Genuine Old Unused Stock


    Item Number: NKT717
    £7.00 (inc VAT £8.40)
     
  • NKT734 Transistor

    NKT734 Transistor

    NPN Germanium TO5 20V 300mA 4MHz 40min@50mA. Genuine Old Unused Stock


    Item Number: NKT734
    £7.00 (inc VAT £8.40)
     
  • NKT736 Transistor

    NKT736 Transistor

    NPN Germanium TO5 15V 300mA 8MHz 50min@50mA. Genuine Old Unused Stock


    Item Number: NKT736
    £7.00 (inc VAT £8.40)
     
  • NKT773 Transistor

    NKT773 Transistor

    NPN Germanium TO1 12V 300mA 1MHz 50min@50mA. Genuine Old Unused Stock


    Item Number: NKT773
    £7.00 (inc VAT £8.40)
     
  • NKT781 Transistor

    NKT781 Transistor

    NPN Germanium TO1 20V 1A 4MHz 52min@500mA. Genuine Old Unused Stock


    Item Number: NKT781
    £7.00 (inc VAT £8.40)
     
  • No 10 Slotted Self Tapper Screws 13mm Long in pack of 100

    No 10 Slotted Self Tapper Screws 13mm Long in pack of 100

    Self Tapper. No 10 (4.8mm) 13mm long. Pan Head Bright Pack of 100



    Item Number: 10S13
    £3.50 (inc VAT £4.20)
     
  • NodeMcu v3  WiFi Module 2.4GHz with ESP8266, CH340 and USB port

    NodeMcu v3 WiFi Module 2.4GHz with ESP8266, CH340 and USB port

    2.4GHz WiFi NodeMcu IoT Development board for Arduino and other IOT projects

     
    This module uses the popular ESP8266 microchip with full function WiFi as well as its own microcontroller.
    It employs the CH340 USB to Serial converter.
    This module can be used to add WiFi to your microntroller project. Can be programmed directly from the Arduino IDE to work independently. 
     
    Voltage : 5VDC
    Frequency : 2.4GHz
    Wireless Standard : 802.11 b/g/n
    Dimensions : 57mm x 30mm


    Item Number: NODEMCU
    £6.50 (inc VAT £7.80)
     
  • Non-Contact Metal Detector Kit

    Non-Contact Metal Detector Kit

    Non-Contact Metal Detector Kit

    Basic metal detector sensor module with buzzer and LED alarm. Will detect metal at a range of up to 60mm, including through soil, cothing, etc. Requires an input voltage of 3-5V DC, which can be supplied to the module via the 2 pin screw terminal (e.g. battery pack, USB, power supply). The sensitivity can be adjusted by the VR1 potentiometer.



     



    Item Number: CKMD1
    £3.50 (inc VAT £4.20)
     
  • NUX Brownie Distortion Pedal

    NUX Brownie Distortion Pedal

     

    NUX Brownie Distortion Pedal

     
    Shopping for a British distortion pedal? Try the NUX Brownie! The Classical British rock tones of the 1970’s, packed into one little box. How it works? By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced. Brownie has a specially designed BJT input stage causing it to “break-up” when the preamp tube starts to distort. It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier. It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted. NUX Brownie uses a low-pass tone control filter to simulate the Variac effect (by lowering the voltage going into the amplifier) for rounding-off your tone. The range of tone is controlled yet perfect for dialing-in the high-end response. The power clipping circuit is crafted from a modern low-noise op-amp and 2 red LEDs. It can create symmetrical clipping that distorts both halves of the signal keeping the sound smooth. True bypass circuits with a high quality TPDP mechanical foot-switch gives the bypass its phenomenal signal clarity.
     
    Rotary gain, level & tone controls
    True bypass
    Luminous glow-knobs for dark-stage environments
    Strong and lightweight aluminium die-cast chassis
    Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied)


    Item Number: NDS1
    £39.00 (inc VAT £46.80)
     
  • NUX Sculpture Compressor Pedal

    NUX Sculpture Compressor Pedal

    NUX Sculpture Compressor Pedal

     
    NUX Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones.
     
    • Adjustable sustain and level
    • Blend control to feed in some natural attack
    • Selectable soft clip and clean modes
    • Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied)
    Power supply: 9Vdc (centre-negative power adaptor required)
    Current consumption: 100mA
    Input impedance: 1M Ohm
    Output impedance: 20 Ohm
    Controls: Sustain, Blend, Level, On/Off/Mode switch
    Dimensions: 94 x 53 x 51mm
    Weight: 174g


    Item Number: NCP2
    £42.00 (inc VAT £50.40)
     
  • NUX Tube Man MK II Overdrive Pedal

    NUX Tube Man MK II Overdrive Pedal

    NU-X Tube Man MKII Overdrive Pedal

    Genuine Tube-like sound that makes it more than your average Tube Screamer pedal! More gain ! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts (diode-clipping). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But there's a better way! Using a FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. A FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.
     
    • Rotary drive, level & tone controls
    • True bypass / buffer bypass
    • Luminous glow-knobs for dark-stage environments
    • Strong and lightweight aluminium die-cast chassis
    • Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied)


    Item Number: NOD2
    £39.00 (inc VAT £46.80)
     
  • Nylon Nut M3 Pack of 10

    Nylon Nut M3 Pack of 10

    Nylon Nut. M3 (3mm dia Metric thread) 10 pack



    Item Number: 30YNT
    £0.75 (inc VAT £0.90)
     
  • Nylon Slotted Cheese Head Screws 12mm Long 10 pack

    Nylon Slotted Cheese Head Screws 12mm Long 10 pack

    Nylon Cheesehead Screw Slotted. M3 (3mm dia Metric thread) 12mm long. 10 pack



    Item Number: 30Y12T
    £0.75 (inc VAT £0.90)
     
  • Nylon Slotted Cheese Head Screws 20mm Long 10 pack

    Nylon Slotted Cheese Head Screws 20mm Long 10 pack

    Nylon Cheesehead Screw Slotted. M3 (3mm dia Metric thread) 20mm long 10 pack



    Item Number: 30Y20T
    £0.75 (inc VAT £0.90)
     

Bestsellers


Trustpilot