|Now FREE Delivery on UK mainland orders over £30+VAT|
75 ohm BNC Plug Quickfit Twist-on plug
For use with RG59 or other 6mm cable.
Simple to use:
1. Strip cable back.
2. Inner core is gripped by the claws down the plug
3. twist screen until held by the inner thread
High Quality Lithium Coin Cell. 3 Volt. Extremely Long Life. 12 X 2.0mm.
Switchmode Flat (Regulated) Power Supply. 12VDC (Single voltage) 5 Amps.
Complete with mains lead with 3 pin UK mains plug
Now built with interference filters
5.5 x 2.1mm (Centre Positive) output plug.
Suitable for most CCTV Systems, cameras and anyhthing that uses 12VDC up to 5 amps
DC Line Plug 2.1 x 5.5mm with 2 way screw terminal block connection Marked + and -
DC Line Socket (Female) 2.1 x 5.5mm with 2 way screw terminal block connection Marked + and -
Accepts 2.1 x 5.5mm Plugs.
High Definition 2.1 Megapixel HD 1080P White Eyeball Dome Camera with 20M Night Vision.
For Outdoors and Indoor. 4 in 1 camera: AHD, TVI, CVI and CVBS
High Definition camera with a high quality, wide-angle lens, Its high definition image is comparable to HD Television Pictures. Ideal to upgrade old CCTV cameras on existing cables.
Athough this is a high definition camera, we can set it for older non-HD DVRs if you contact us on 020 8452 0161.
Image Sensor: 1/2.9" Sony EXMOR IMX323 CMOS PAL/NTSC
Data Logger Shield with Real Time Clock for Arduino Uno
This Arduino compatible shield allows the logging and storage data from an Arduino project to an SD card.
Having a built in Real Time Clock (RTC) insures data accuracyover long time periods and at times where your project may suffer from power loss. Supplied with a CR1220 lithium battery.
Waterproof digital temperature probe for Arduino and other microcontroler projects
This probe has a DS18B20 digital temperature IC inside a waterproof probe. It will give you a digital output that will vary depending on temperature.
Voltage : 3.3 to 5VDC
Temperature : -55C to 110C
Length : 1M
DS18B20 High Accuracy Digital Thermometer.
This DS18B20 digital thermometer is extremely useful as a tool for measuring temperature for all kinds of different applications. It has a very wide temperature range (-55°C to 110°C) and high accuracy, especially at temperatures between -10°C to 85°C. In this project, we will be using an Arduino to read the temperature from the probe and display it on an LCD screen equipped with a KY1602 module.
Here’s what you will need:
First, you will need to connect the probe to the breadboard. This should be easy to do since the probe comes with pre-tinned leads. Simply push the ends of the leads into the breadboard sockets and use a 4.6kΩ pull-up resistor on the data pin as shown in fig.1. Now, you will need to connect the Arduino to the breadboard. Use the jumper leads to connect the male to male jumper leads to connect the power, ground and digital pin to the breadboard.
Solder the KY1602 module onto the 1602 LCD screen. Pin 1 on the KY1602 module is the one closest to the 4 data and power pins. Once soldered, you can now connect the LCD display to the Arduino as shown in fig.1:
Connect the Arduino to your computer and install the libraries mentioned above. If you need help installing the libraries, CLICK HERE for a quick tutorial.
You can now start writing the code to get this all working:
First, clear the IDE window. Then, include the aforementioned libraries:
Initialize the KY1602 I2C LCD driver (address 0x27 in this example) and specify the LCD display (in this case 16 characters, 2 rows):
Initialize the LCD display and turn on the LCD backlight. This is done inside the void setup function:
Start a while loop. This is done inside the void loop function:
Set the cursor to the first character and display the temperature in ºF and ºC:
Choose how often to update the screen (in this case, 800ms):
The completed code should look like this:
Press the “Upload” button at the top (button with tick, located below “File”). The IDE will now compile the code and upload it to your Arduino (this will take a few moments).
Done! If the connections are correct and there are no errors with the code, the LCD should display the temperature.
Image Sensor: 1/2.5" CMOS Sensor
An outdoor or indoor camera in a robust metal casing.
5 Megapixels HD gives an super high definition image with true colours.
Close up to wide-angle 2.8-12mm Varifocal Megapixel lens,
Easy angle & focusing adjustment .Can be mounted to cover any direction.
This camera can be set for lower, older definitions such as 960H, 4MP or 2MP to be compatible with older HD DVRs. Please phone 020 8452 0161 if you need this adjustment
Image Sensor: 1/2.5" CMOS Sensor
Resolution: 5.0 Megapixel, 2592(H)×1944(V)
Lux: 0.05 IR off, 0 IR on
Lens: Fixed 2.8-12mm with IR Cut Filter
Wide Dynamic Range: Digital
Noise Reduction: Digital
Auto White Balance: Yes
Anti-Fog Dual Glass: Yes
Power Reqd: 12VDC 750mA
Infra-red Source: 24pcs x 14µ SMD IR LEDs
Infra Red Beam: 30 Metres
Terminations: BNC & DC 2.1 x 5.5mm on Flying Leads
Size: D120 X H98mm