|Now FREE Delivery on UK mainland orders over £30+VAT|
OPTOISOLATOR No Base In: 5V 60mA. Out: 32V 50mA. 63% min
LED Bezel 3mm. High quality Nickel-plated brass
Complete with 6.3mm retaining nut. Rubber push-fit retaining mount for 3mm LED. 2 leg holes at rear
Red & Black 2 core Fig 8 Power Cable For Loudspeaker & other uses 4mm x 8mm diameter. 25Amps. Priced per Metre
Electret Microphone Insert (Condenser Mic Insert). dimensions: 11 x 7mm. Impedance 300-1000 ohms. Freq response 50Hz to 12KHz. Works from 1-10VDC. Small battery will power this unit such as SG13S. 2 Solder Contacts on the back. Change 1K resistor to lower value for lower battery voltage.
Hammond 1550P High Quality, Heavy Duty Diecast Aluminium Box
Easy to drill for switches and sockets etc.
For housing & screening electronic circuits.
External Dimensions: 80 x 55 x 25mm
Hammond Manufacturing Black ABS Plastic Box with Screw-down lid.ABS Box 152.4 x 81.3 x 45.7mm
Self Adhesive Black Square polyurethane Feet 12.7 x 6mm pack of 4
Dual Display Panel Meter, 0-100VDC and 0-10ADC
This handy compact panel meter will display the voltage and current clearly. It is ideal for a bench power supply or any project that requires accurate voltage and or current measurement. The meter can either be powered from the supply it is measuring if it is between 4.5-30VDC or from an independant power source.
Voltage Measurment : 0 - 100VDC
Current Measurment : 0 - 10ADC
Working Voltage : 4.5 - 30VDC
Dimensions : (W)48mm x (H)29mm x (D)22mm
Red (Thick) - Voltage in for Current Measurment
Black (Thick) - Voltage out for Current Measurment
Red (Thin) - Supply Positive 4.5-30VDC (connect to voltage to be measured if not using a seperate supply)
Black (Thin) - Supply Ground (Do not connect if not using a seperate supply)
Yellow (Thin) - Voltage to be Measured 0-100VDC