|Now FREE Delivery on UK mainland orders over £30+VAT|
Terminal Post with 4mm Banana recptacle & Binding Post for bare wire or Spade Connectors: Black
Terminal Post with 4mm Banana recptacle & Binding Post for bare wires or Spade Connectors: Red
IC Socket Standard 8 pin
Ceramic Capacitor 1KV 10nF (0.01
Carbon Film Resistor 1/4 Watt 5% 10 Pack. 1K ohm
Sub Miniature Toggle Switch SPDT Single Pole Changeover
125V 3A. 8mm L x 5mm W x 7mm H
Multicolour 5mm LED Red Blue Green & combintations
High Brightness Blue, Red & Green LED chips, capable of producing many colours.
20mA max per LED. Reverse voltage 5V max.
Blue 470nM peak. VF= 3.2, 800mcd typ
Red 640nM peak. VF= 1.9, 1300mcd typ
Green 520nM peak. VF= 3.2 1200mcd typ
Common Cathode (pin 2)
Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 64 X 95mm
Dual Display Panel Meter, 0-100VDC and 0-10ADC
This handy compact panel meter will display the voltage and current clearly. It is ideal for a bench power supply or any project that requires accurate voltage and or current measurement. The meter can either be powered from the supply it is measuring if it is between 4.5-30VDC or from an independant power source.
Voltage Measurment : 0 - 100VDC
Current Measurment : 0 - 10ADC
Working Voltage : 4.5 - 30VDC
Dimensions : (W)48mm x (H)29mm x (D)22mm
Red (Thick) - Voltage in for Current Measurment
Black (Thick) - Voltage out for Current Measurment
Red (Thin) - Supply Positive 4.5-30VDC (connect to voltage to be measured if not using a seperate supply)
Black (Thin) - Supply Ground (Do not connect if not using a seperate supply)
Yellow (Thin) - Voltage to be Measured 0-100VDC
Red & Green 5mm 2pin LED in anti-parallel. Milky diffused.
2V-2.2V 30mA 30mcd. Reverse polairty changes colour