|Now FREE Delivery on UK mainland orders over £30+VAT|
Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) sacing 95 X 127mm
DIL Switch. Each SPST.1" (2.54mm) spacing 16 pins in total. 25V 25mA
Matrix Board. 0.1 inch (2.54mm) with Copper Padded Holes Single Copper Pads around individual holes
They are not connected to each othe - connect with wires or jumpers.
Phenolic 1.8mm Board. 2200 holes. 160 x 115mm. Rows and Columns marked for easy identification
Solderless Plug-In Breadboard 0.1 inch - 2.54mm spacing
Ideal for experiments or teaching. 830 Points. 2 x 63 x 5 and 4 x 10 commoned points. 63 rows of 5 points. Self-adhesive backing (or can be used free-standing).
Can be used over and over again for prototyping circuits. Useful numbered grid. Accepts IC sockets, ICs and pin strips as well as discrete devices such as transistors, resistors capacitors, LEDs, diodes and leaded items.
UNO R3 Arduino-compatible board with the ATMega328P, ATMega16U2 and CH340G serial converter
Since Arduino is an "Open Source" hardware as well as software anyone can duplicate the Arduino Uno R3 boards exactly, even using original parts, this means we are able to supply this Arduino compatible board at a fraction of the cost of the original but still working identicaly to the original.
The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.
Arduino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. The development board has everything needed to support the microcontroler to help you create an endless amount of projects and if you are just starting then the worldwide Arduino community is full of ideas, guides and help to get you started or help you complete your project.
1 x Arduino Compatible Uno R3 development board
1 x USB Cable
Software can be downloaded from the Arduino website here
RGB full colour SMD LED module for Arduino and other microcontroler projects
A 5050 surface mount RGB LED, can create virtually any colour by varying the intensity of the 3 colour LEDs, via PWM output.
Resistors are needed to connect to Arduino.
Voltage : Red 1.8 to 2.4VDC
Green 2.8 to 3.6VDC
Blue 2.8 to 3.6VDC
5V relay module for Arduino and other microcontroller projects
This module has a 5V changover relay, protection diode, resistor and LED.
The relay allows the low current microprocessor outputs to switch higher currents and voltages.
Trigger voltage : 5VDC
AC Switch ratings : 250V 10A
DC Switch ratings : 30V 10A
2.4GHz Serial WiFi module for Arduino and other IOT or microcontroller projects
This module uses the popular ESP8266 microchip with full function WiFi as well as its own microcontroller. This module can be used to add WiFi to your microntroler project or can be programed directly from the arduino IDE to work independently. This module also has a built in regulator so it can be powered directly from 5VDC. Supplied with 8 way header.
Voltage : 5VDC
Frequency : 2.4GHz
Wireless Standard : 802.11 b/g/n
Dmensions : 24mm x 46mm
Capacitive touch sensor module for Arduino and other microcontroller projects
One side has a 9mm x 9mm capacitive touch area, and a TTP223 touch sensor IC on the reverse.
An LED indicates when the switch is touched, giving a digital. It can be set either a high or low output, and momentary or latching output by joining or not joining the A and B connections:
A open = High output when touched
A Closed = Low output when touched
B open = Momentary switch action
B Closed = Latching switch action
Voltage : 3 to 5VDC
PCB Size 14x10mm
Login to post a review