|Now FREE Delivery on UK mainland orders over £30+VAT|
Solderless Plug-In Breadboard 0.1 inch - 2.54mm spacing. Ideal for experiments & prototyping.
400 Points. 2 x 30 x 5 commoned points. 4 rows of 25 points. Self-adhesive backing (or can be used free-standing).
Switch Cleaner Super 10 by Servisol 200ml Aerosol
Spray Cleaning Solvent, with a small amount of lubricant added to leave a thin protective film on pots, switches, contacts etc. Safe on most plastics and rubber. Widely used throughout the electronic industry.
Contains Isopropyl Alcohol
Straight Pin Header Male Strip 2.54mm spacing (0.1 inch)
Gold Plated Phosphor Bronze pins.
1 row of 36 pins
Solderless Prototype Plug-In Breadboard 0.1 inch - 2.54mm spacing
Ideal for experiments & teaching. 830 Points. 2 x 63 x 5 and 4 x 10 commoned points.
63 rows of 5 points. Self-adhesive backing (or use free-standing).
Can be used over and over again for prototyping circuits.
Useful numbered grid. Accepts IC sockets, ICs and pin strips, transistors, resistors capacitors, LEDs, diodes, wire, etc
Arduino compatible board with the ATMEGA328P microcontroller
The Arduino Nano is a small, breadboard-friendly version of the Arduino UNO.
It has the same functionality as the Arduino Duemilanove but at a much smaller size.
The Arduino Nano is well-suited for rapid prototyping and as a great general-purpose microcontroller.
Since Arduino is open source hardware & software, anyone can copy the Arduino Nano boards exactly, even using original parts.
We are therefore able to supply this Arduino identical compatible board at a fraction of the cost of the original.
Variable Input Voltage (7-12V)
Indicator LEDs for immediate feedback
Compact Form Factor (45mm x 19mm)
14 Digital I/O pins
8 Analog I/O pins
16 MHz clock speed
32kb flash memory (of which 2kb is used by the bootloader)
Software can be downloaded from the Arduino website here
Solderless Male to Female Jumper Leads - set of 40
This set of coloured male to female jumper leads can be used intact, or pealed appart into small sets or single leads. Great for prototyping with Arduino, Raspbery Pi and other projects
It's easy to keep track with 10 different coloursfor easy and quick fault finding.
4 of each: Red, Orange, Yellow, Green, Blue, Grey, Purple, Brown, Black and White
Each length: 200mm
Data Logger Shield with Real Time Clock for Arduino Uno
This Arduino compatible shield allows the logging and storage data from an Arduino project to an SD card.
Having a built in Real Time Clock (RTC) insures data accuracyover long time periods and at times where your project may suffer from power loss. Supplied with a CR1220 lithium battery.
Rotary encoder module for Arduino and other microcontroler projects
This module uses a 30 position rotary encoder with push switch.
The rotary encoder works by having 2 switches (A&B) for each position that are slightly offset, indicating the direction of rotation by detecting if "A" switches before or after "B".
Voltage : 5VDC
I2C Paralel to 2 Pin Serial converter for Arduino type LCD screens
This converter can be soldered directly to a standard 1602 LCD screen to convert it to the more convenient 2 pin serial (I2C) used in many Arduino projects.
There is a removable jumper to allow connection with both backlit and non backlit screens.
A potentiometer can adjust the brightness & contrast of the LCD.
GND = Ground
VCC = 5V
SDA = Serial Data Line
SCL = Serial Clock Line
Login to post a review