LM1881N Integrated Circuit (IC)

IC MCU 1K EEPROM 36 RAM 10MHz 18DIL

High Quality Ferrite Rod 10.5mm x 100mm

Pack of 100 Single Sided Circuit Pins to fit 0.1 inch 2.5mm Strip Board, Matrix Board & Plain Board

Solderless Jumper Leads for use with Breadboard

This set of coloured jumper leads, invaluable when creating circuits with Breadboard. Seven different colours and Four different lengths will simplify your connections, keeping  your work neat and clear to identify. 

Colours: Red, Orange, Yellow, Green, Blue, Black and White

Lengths: 120mm, 165mm, 200mm and 240mm

Solderless Male to Female Jumper Leads - set of 40

This set of coloured male to female jumper leads can be used intact, or peeled appart into small sets or single leads. Great for prototyping with Arduino, Raspbery Pi and other projects

Keep track easily with 10 different colours for quick fault finding. 

4 of each: Red, Orange, Yellow, Green, Blue, Grey, Purple, Brown, Black and White

Each length: 200mm

Solderless Female to Female Jumper Leads in a set of 40

This set of coloured female to female jumper leads can be used together or peeled apart into smaller sets or single leads. They are great for prototyping with boards like Arduinos and Raspberry Pi.

With 10 different colours and 4 of each colour, it's easy to keep track for quick fault finding. 

Colours: Red, Orange, Yellow, Green, Blue, Grey, Purple, Brown, Black and White

Length: 200mm

TDA2003A 10W Amplifier Kit

This kit uses a TDA2003 to create a small but powerful audio amplifier suitable for most uses. It works best with supply voltages between 8-18VDC and loads down to 2Ω.
Perfect for use with passive bookshelf speakers, or as a general purpose audio amplifier. 

The following components are included in this kit:

• Circuit Layout Diagram + Schematic x 1
• Volume (20kΩ LOG) potentiometer x 1 
• 1000µF 16V Capacitor x 1
• 470µF 25V Capacitor x 1
• 100µF 25V Capacitor x 1
• 10µF 25V Capacitor x 1
• 100nF Boxpoly Capacitor x 2
• 47nF Boxpoly Capacitor x 1
• 2W 1Ω Resistor x 1
• 2W 2.2Ω Resistor x 1
• Metal Film 220Ω Resistor x 1
• Metal Film 39Ω Resistor x 1
• PCB Terminal Blocks x 2
• PCB x 1
• TDA2003A IC x 1
   

Technical Specifications:

Input Voltage: 8-18VDC
Output Power: 10W @ R_L= 2Ω, 6W @ R_L= 4Ω
THD: 0.18% @ R_L= 2Ω, f = 1kHz
Efficiency: 65% @ R_L = 2Ω, f = 1kHz
Power Dissipation @ T_case = 90­°C: 20W 
Frequency Response: 40-15000Hz