|Now FREE Delivery on UK mainland orders over £30+VAT|
Mylar Polyester film capacitor coated in epoxy resin. 100VDC 10% Tolerance or better. 10nF (0.01uF, 10,000pf)
Solderless Jumper Leads for use with Breadboard
This set of coloured jumper leads, invaluable when creating circuits with Breadboard. Seven different colours and Four different lengths will simplify your connections, keeping your work neat and clear to identify.
Colours: Red, Orange, Yellow, Green, Blue, Black and White
Lengths: 120mm, 165mm, 200mm and 240mm
Arduino compatible board with the ATMEGA328P microcontroller
The Arduino Nano is a small, breadboard-friendly version of the Arduino UNO.
It has the same functionality as the Arduino Duemilanove but at a much smaller size.
The Arduino Nano is well-suited for rapid prototyping and as a great general-purpose microcontroller.
Since Arduino is "Open Source" hardware & software, anyone can copy the Arduino Nano boards exactly, even using original parts.
We are therefore able to supply this Arduino identical compatible board at a fraction of the cost of the original.
Variable Input Voltage (7-12V)
Indicator LEDs for immediate feedback
Compact Form Factor (45mm x 19mm)
14 Digital I/O pins
8 Analog I/O pins
16 MHz clock speed
32kb flash memory (of which 2kb is used by the bootloader)
Software can be downloaded from the Arduino website here
Arduino compatible Backlit LCD screen with 2 lines of 16 Characters (32 total)
This LCD Screen is a great addition to lots of Arduino projects as well as many other projects.
The screen is blue with white characters and has a backlight.
Display Format: 16 Characters x 2 Lines (32 total)
Character Size: 3.07mm(W) x 6.56mm(H)
Dimensions: 80mm(W) x 35mm(H) x 11mm(T)
Passive buzzer module for Arduino and other microcontroler projects
This module is a simple passive piezoelectric buzzer that will give out a variable tone depending on the frequency put in to it.
Frequency : 1.5 to 2.5kHz
Voltage : 1.5 to 15VDC
Temperature and humidity module for Arduino and other microcontroler projects
This module has a DHT11digital temperature and humidity sensor and a resistor. The DHT11 uses a thermister for the temperature sensing and a capacitive humidity sensor along with an internal IC to give a digital output with both temperature and humidity.
Voltage : 3.3 to 5VDC
Humidity range : 20% to 90% @ 5% RH accuracy
Temperature range : 0C to 50C at 2C accuracy
Rotary encoder module for Arduino and other microcontroler projects
This module uses a 30 position rotary encoder with push switch.
The rotary encoder works by having 2 switches (A&B) for each position that are slightly offset, indicating the direction of rotation by detecting if "A" switches before or after "B".
Voltage : 5VDC
I2C Paralel to 2 Pin Serial converter for Arduino type LCD screens
This converter can be soldered directly to a standard 1602 LCD screen to convert it to the more convenient 2 pin serial (I2C) used in many Arduino projects.
There is a removable jumper to allow connection with both backlit and non backlit screens.
A potentiometer can adjust the brightness & contrast of the LCD.
GND = Ground
VCC = 5V
SDA = Serial Data Line
SCL = Serial Clock Line
SG90 Micro Servo for Arduino and other microcontroller projects
This micro servo is the most popular 9g servo in the world, it is used for RC models, robotics and has many other uses. It is compatible with Arduino and other microcontroler projects. Supplied with 3 different servo horns and fixing screws.
Voltage : 5VDC
Speed : 60 Degrees in 0.12 second
Torque : 1.8kg/cm
Wire Length : 150mm
Size : 23x12.2x29mm
Weight : 9g
Login to post a review