The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
+44 (0)20-84520161 Contact Us
Now FREE Delivery on UK mainland orders over £30+VAT

2.1MP 1080P High Definition Camera hidden inside a PIR Housing

  • Details

  • Recommended

  • Reviews

  • Send


Item Number
0.35 Kg
Item Condition
£29.00 (inc VAT £34.80)



  • Octal Nickel Plated Valve Holder (tube Socket)

    Octal Nickel Plated Valve Holder (tube Socket)

    A Very High Quality Porcelain (Ceramic) Octal Valve Base (Tube Socket) 8 pins. Durable Plating.

    • Test Voltage: 1600V,
    • Insulation resistance >10,000M ohms,
    • Contact resistance: < 10 milliohms.
    • For many Large Output Valves inc EL34, KT66, KT88, 6L6, 6551, 5881, GZ34, 5U4G.
    • Versatile flange can be nounted above or below the chassis.
  • CCTV Microphone & Pre-amplifier  Module

    CCTV Microphone & Pre-amplifier Module

    Add-on CCTV Microphone & Pre-amplifier Module

    Ready to plug into an amplifying device or DVR. Needs 12VDC supply. Very sensitive. Omni-directional Electret Microphone. This Very Sensitive Module, can be used as an addition to any of our cameras.

    *  Power 12VDC @ 50mA Via 2.1 x 5.5mm DC Socket
    *  Audio line out Via Phono Socket (RCA)
    *  Dimensions: 8x30mm (not including lead) Length including lead 450mm

  • Tiny 25mm 1080P High Definition Sony AHD 2.4MP Pinhole Camera

    Tiny 25mm 1080P High Definition Sony AHD 2.4MP Pinhole Camera

    25mm 1 inch Square Miniature 1080P 2.4MP HD Camera with Sony Sensor

    So small, you can hide it behind a piece of card with just a tiny hole for the lens! 
    A tiny 25mm square and only 10mm deep (20mm with lens), this camera gives the exceptional High Definition you would expect from a larger, more expensive camera. Ideal for use where detail is imperative but descretion is required. Very easy to fit in a clock, picture, behind a notice board etc. Just needs a small 4mm hole for the lens to look through.
    Athough this is a high definition camera, we can set it for older non-HD DVRs if you contact us on 020 8452 0161.
    You can use our YAU microphone module to capture sound as well. 
    Chipsets: 1/2.9 inch Sony IMX322
    Usable Ilumination: 0.01LUX
    Resolution: 1920 x 1080 lines (2.4MP) 
    Lens: Pinhole 3.7mm Conical Pinhole
    Power Reqd: 12V 200mA
    Electronic Shutter 1/50 - 1/100000
    Auto White Balance
    S/N Ratio >48dB
    Terminations: Flying Leads with On Screen Menu Controller, plus BNC Video & DC Connectors
    Dimensions:: 25 x 25 x 20mm

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *
Type the characters you see in the picture:


Invisible Night Vision IR LEDs (no glow) High Definition 2.1MP 1080P Camera Inside a Dummy PIR Housing 


High quality 2.1MP 1080P High Definition 4in1 (AHD,TVI,CVI and CVBS) camera in a PIR housing.Fitted with 940nm IR LEDs that are totally invisible (no red glow like other cheaper models) Ideal for surveillance in indoor areas without arousing suspicion in both well lit and dark environments.

Athough this is a high definition camera, we can set it for older 720P or non-HD DVRs if you contact us on 020 8452 0161.


Image Sensor: 1/2.9" Sony Exmor IMX323 CMOS Sensor
Fulham FH8536E
Resolution: 2.0 Megapixel, 1920(H)×1080(V) 1080P
Lux: 0.01 (0 Lux with IR on)
Lens: Fixed 3.7mm Pinhole with IR Cut
Power Requirements: 12VDC 1Amp max.
Noise Reduction: 2D & 3D
Shutter: 1/50-1/100,000

Infra-red Source: 49pcs 960NM (Invisible to the human eye) IR LEDs
Terminations: Flying Leads with BNC (Video) & DC (Power) Sockets
Operating Temperature: -10 to +55 C
Size: W69mm x H118mm x D47mm

Recently Viewed