|Now FREE Delivery on UK mainland orders over £30+VAT|
Bridge Rectifier 35A 1000V with 6.3mm Push on Terminals
Metal Body with Centre Hole
Also known as KBPC3510
Strong Solid Plastic PP3 9 Volt Battery Snaps.
With 150mm Red & Black PVC covered wires emerging at one end.
Water repellent body.
Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more batteries
Ultra Bright White 5mm LED Water Clear.
DC Voltage 3.0 to 3.4VDC
Max Current: 40mA.
Continuous Working Current: 20mA for 11,000mcd
Fuseholder for 20mm fuses with wire ends. Bayonet Fitting
Nominal Voltage : 250V
Nominal Current : 4A
Dry soldering-iron tip cleaner that maintains the tip temperature of your soldering iron.
Leaves a fine amount of solder on the tip, preventing temperature loss and corrosion, compared to a wet sponge.
Complete with alloy dish
Pack of 10 Self Adhesive PCB Pillars in Nylon. 12.7mm length with 3M tape on base and snap-lock PCB fitting. For mounting PCBs without drilling.
Panel fuseholder with screw on cap for 20mm fuses
Acceptsr 5mm x 20mm fuses
High Quality Changeover (DPDT) Toggle Switch with Metal Dolly.
Rated at 250VAC 16A 12mm cut-out/nut. Contact Resistance 100 milliohms max
Dims: Total Height (Toggle Tip to Tags Ends): 59mm, Width: 20mm. Length: 32mm
Dielectric Strength: 1000V RMS (min)
Standard Rocker Switch: Double Pole DPST On/Off with Green Neon 240VAC 16A.
Fits 22 X 30mm Cut-out. 6.3mm Flat blade connectors.