Fuse Shaped Lamp 5 to 8V 250mA Tubular

High Quality 4mm chassis/panel socket rated at 10A with solder tag. Insulated Black

Total Length: 31mm: 

Nut: M8 8mm cut-out

Terminal Post with 4mm Banana recptacle & Binding Post for bare wires or Spade Connectors: Red

Rubber Drive Belt with Square Section. Thickness: 1.2mm, Inside Diameter: 25mm

Pair of 2 pin DIN Speaker Plug with Flat and Round Pins.

Screw Terminals for easy connection, inside plastic body. Red & Black Pair.

High Quality 4mm chassis/panel socket rated at 10A with solder tag. Insulated Red

Total Length: 31mm: 

Nut: M8 8mm cut-out

10uF 63V Radial Electrolytic 105C High Temperature, Low Leakage,  Tol ±20%

Polypropylene Battery holder for 6 X AA Batteries,

Arranged 3 x 2. All in series to give 9V total.

PP3 clips (can be soldered)

Panel fuseholder with screw on cap for 20mm fuses 

• Rated 10A 250V AC
• Plastic Body and cap.
• Easy Finger release
• Solder terminal lugs
• Dimensions 37.7 x 15mm
• UL flame 94V-2 approved

LCR-TC2 Multi Component Tester for Transistors, Diodes, Resistors, Capacitors, Inductors, IR, etc.

This amazing little tester should be part of any hobbyist or professional's toolbox. It can measure resistance, capacitance, inductance, diodes, BJTs, JFETs, MOSFETs, IGBTs, SCRs and a wide range of IR protocols.
Complete with built-in rechargeable battery, it can be used on the go or in the workshop. The hook probe leads included are especially useful for testing components in-ciruit.