|Now FREE Delivery on UK mainland orders over £30+VAT|
75 ohm BNC Plug Quickfit Twist-on plug
For use with RG59 or other 6mm cable.
Simple to use:
1. Strip cable back.
2. Inner core is gripped by the claws down the plug
3. twist a few times and screen is held by thread.
PROFESSIONAL, LOCKABLE CCTV POWER SUPPLY with 18 WAY DISTRIBUTION TERMINALS. 12V 10AMP MAX
An 18 way power supply, with distribution terminal-blocks and PTC (resettable fuses) for each camera. Housed in a heavy-duty, secure, steel housing with key. 12VDC 10 Amps. Can supply up to 1.1A per channel (providing 10Amps max overall is not exceeded). Power required: 100-240V AC. Supplied with IEC socket & Lead, but it is possible to be hard-wired via the knock-out holes.
Dimensions: 205 x 245 x 50mm
Independent PTC fuses and LED indicators insure that when a problem occurs, only affected channel will open the PTC fuse - other channels will still work. Removal of the fault will allow current to flow again.
Applications： CCTV Cameras, PTZ, IR Illuminators, Video Processors， Access Control, etc.
DC Line Plug 2.1 x 5.5mm with 2 way screw terminal block connection Marked + and -
DC Line Socket (Female) 2.1 x 5.5mm with 2 way screw terminal block connection Marked + and -
Accepts 2.1 x 5.5mm Plugs.
High Quality Self Amalgamating Tape - 19mm x 10 metres in Black
BT approved to BT Spec M128. Strong elastic & adhesive properties.
Suitable for insulation, termination, sealing, waterproofing, splicing and repair.
When tapes are stretched and wrapped around each other, they merge forming a solid impenetrable join.
Junction Box for external (IP55) and internal use 100 x 100 x 50mm
with snap-shut cover and 6 flexible cable 29mm entry holes. Knock out mounts on base. 4 stainless steel screws.
Right Angled BNC Plug Solderless (Screw & Crimp), or can be soldered. Flexible Cable Inlet. For use with RG58, RG59 etc cables. Gold p[lated pin
BNC Compression Fit Plug
For use with RG59, etc 6mm 75 ohm cable (CCTV shotgun cable).
Ensures quick and very secure waterproof seal to the cable.
Simply strip the cable back, push on the plug and compress, using the compression tool.
Login to post a review