|Now FREE Delivery on UK mainland orders over £30+VAT|
5 pin DIN Line Socket 180 deg - to fit 5 pin 180 deg DIN plug
XLR 3 pin chassis Male
Solid Diecast Body
Solid Diecast Body
IC High Quality Turned Pin Socket. Totally protected from solder. Gold plated contacts 28 pin 7.5mm Wide
1000uF 35V Radial Electrolytic 105C High Temperature, Low Leakage, Tol 20%
Solderless Jumper Leads for use with Breadboard
This set of coloured jumper leads, invaluable when creating circuits with Breadboard. Seven different colours and Four different lengths will simplify your connections, keeping your work neat and clear to identify.
Colours: Red, Orange, Yellow, Green, Blue, Black and White
Lengths: 120mm, 165mm, 200mm and 240mm
I2C Paralel to 2 Pin Serial converter for Arduino type LCD screens
This converter can be soldered directly to a standard 1602 LCD screen to convert it to the more convenient 2 pin serial (I2C) used in many Arduino projects.
There is a removable jumper to allow connection with both backlit and non backlit screens.
A potentiometer can adjust the brightness & contrast of the LCD.
GND = Ground
VCC = 5V
SDA = Serial Data Line
SCL = Serial Clock Line
Power Supply Board for Breadboard
This PSU board is designed to fit directly on to a standard breadboard such as our BB400T and BB830. to give 2 power rails, 5V or 3.3V, Rail voltages are switch selectable. It can powered by 7-12V at the DC socket or 5V via the micro USB socket.
Voltage in : 5VDC Via USB or 7-12VDC
Max Current : 700mA
Bluetooth transmitter/receier module for serial communication with Arduinos and other microcontrolers
This module is bassed on the CSR standard bluetooth chip. It is a bluetooth transmitter and receiver that can connect to an arduino and allow serial communications to be sent to the arduino wirelesly from another bluetooth device such as a smartphone, a PC or another one of these modules.
Voltage : 3.3-5VDC
Max Current : 30mA
Frequency : 2.4GHz
Baud Rate : 9600 as defult
Dmensions : 15.5mm x 40mm
Capacitive touch sensor module for Arduino and other microcontroller projects
One side has a 9mm x 9mm capacitive touch area, and a TTP223 touch sensor IC on the reverse.
An LED indicates when the switch is touched, giving a digital. It can be set either a high or low output, and momentary or latching output by joining or not joining the A and B connections:
A open = High output when touched
A Closed = Low output when touched
B open = Momentary switch action
B Closed = Latching switch action
Voltage : 3 to 5VDC
PCB Size 14x10mm