|Now FREE Delivery on UK mainland orders over £30+VAT|
Bridge Rectifier Radial 10A 1000V. Plastic Body with Centre Hole & Thick Leads. Long Lead Positive
SCR Thyrsitor DO4 400V 6A 25mA 2V5
2 Watt 5% Carbon Film Resistor 10K ohms
2 Watt 5% Carbon Film Resistor 100K ohms
2 Watt 5% Carbon Film Resistor 470K ohms
Adjustable Wire Stripping Pliers with Cable Cutter
Robust construction and easy-to-use smooth action, with hardened steel blades and adjustable stripping length.
Maximum cable size 6mm diameter. Bright yellow colour making it difficult to lose.
Strengthened Flexible Crocodile Test leads - Set of 10
A High Quality set of 10 x 500mm test leads in 5 colours, red, black, green, yellow and white. That's 20 soft plastic insulated 25mm crocodile clips.
Essential for engineers, experimenters & hobbyists. Current Rating 2.5A each.
Lead Length: 500mm
15 Piece Precision Miniature Colour Coded Screwdriver Kit in a Clear Transparent Case
A kit of Hardened and Tempered Steel Miniature Screwdrivers in a durable see-through case.
Blades with tough plastic handles.
Contains a selction of Flat-blade, Crosspoint, Torx and Hex Screwdrivers
3 Crosspoint: 2mm, 3mm, 3.5mm
4 Flat: 1mm, 2mm, 3mm, 3.5mm
4 Torx: TX6, TX8, TX10, TX15
4 Hex : 1.5mm, 2mm, 2.5mm. 3mm
Arduino compatible board with the ATMEGA328P microcontroller
The Arduino Nano is a small, breadboard-friendly version of the Arduino UNO.
It has the same functionality as the Arduino Duemilanove but at a much smaller size.
The Arduino Nano is well-suited for rapid prototyping and as a great general-purpose microcontroller.
Since Arduino is "Open Source" hardware & software, anyone can copy the Arduino Nano boards exactly, even using original parts.
We are therefore able to supply this Arduino identical compatible board at a fraction of the cost of the original.
Variable Input Voltage (7-12V)
Indicator LEDs for immediate feedback
Compact Form Factor (45mm x 19mm)
14 Digital I/O pins
8 Analog I/O pins
16 MHz clock speed
32kb flash memory (of which 2kb is used by the bootloader)
Software can be downloaded from the Arduino website here
Login to post a review
This convenient multi network/CCTV cable tester is suitable to test all CAT5, CAT5E, CAT6 and BNC cables. This device will indicate any mis-wired, straight-wired or cross-wired connections and short-circuits. The tester is composed of a transmitter and a receiver to connect either side of the lead to be tested. Simple to use, Green = OK, Red = Problem, LED display.
Battery: 9Vdc (1 x PP3)
Dimension 195 x 92 x 25mm