|Now FREE Delivery on UK mainland orders over £30+VAT|
Ceramic Disc 63VDC 5% 2.5mm spacing 10nF (0.01uF)
2N3904 NPN TO92 EBC 40V 200mA 250MHz
Carbon Film Resistor 1/2 Watt 5% 10 Pack. 330 ohms
Carbon Film Resistor 1/2 Watt 5% 10 Pack. 470 ohms
Carbon Film Resistor 1/2 Watt 5% 10 Pack. 47K ohms
Carbon Film Resistor 1/2 Watt 5% 10 Pack. 100K ohms
Miniature Audio Impedance Transformer 1K ohm primary to 2 x 3.2 ohms
Dimensions: 16 X 16 X 20mm
I2C Paralel to 2 Pin Serial converter for Arduino type LCD screens
This converter can be soldered directly to a standard 1602 LCD screen to convert it to the more convenient 2 pin serial (I2C) used in many Arduino projects.
There is a removable jumper to allow connection with both backlit and non backlit screens.
A potentiometer can adjust the brightness & contrast of the LCD.
GND = Ground
VCC = 5V
SDA = Serial Data Line
SCL = Serial Clock Line
Dual Display Panel Meter, 0-100VDC and 0-10ADC
This handy compact panel meter will display the voltage and current clearly. It is ideal for a bench power supply or any project that requires accurate voltage and or current measurement. The meter can either be powered from the supply it is measuring if it is between 4.5-30VDC or from an independant power source.
Voltage Measurment : 0 - 100VDC
Current Measurment : 0 - 10ADC
Working Voltage : 4.5 - 30VDC
Dimensions : (W)48mm x (H)29mm x (D)22mm
Red (Thick) - Voltage in for Current Measurment
Black (Thick) - Voltage out for Current Measurment
Red (Thin) - Supply Positive 4.5-30VDC (connect to voltage to be measured if not using a seperate supply)
Black (Thin) - Supply Ground (Do not connect if not using a seperate supply)
Yellow (Thin) - Voltage to be Measured 0-100VDC