The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
+44 (0)20-84520161 Contact Us

Audio Power Amplifiers, Preamps Equalisers, Mixers & Gadgets

Products


  • Miniature 20Watt Amplifier with Amazing Extra Bass

    Miniature 20Watt Amplifier with Amazing Extra Bass

    Amazingly Powerful Mini Stereo Amplifier with Maxi Bass: 20W+20W rms
     

    A full powerful sound with hifi quality & full frequency response, this little amplifier has Bass Treble & Volume controls. Measures only 140 x 70 x 40mm.

    Comes complete with power-supply for mains connection or can be driven from 12VDC

    An ideal amp for anywhere, fitting neatly into small spaces at amazing power and clarity. Can be located anywhere (houses, offices, cars, vans, boats etc.)

    Can be powered by 220-250V AC or from 12VDC

    Specifications ::

    • Output Power: 20W + 20W rms
    • Dimensions: are 140 x 70 x 40mm
    • Size: 140mm x 100mm x 40mm
    • Power Supply: 12V 2A DC (included)
    • Input sensitivity: : 200mV
    • Input impedance: : 47k
    • Freq response: : 20Hz to 20kHz
    • Output impedance : 2 to 8 ohms
    • THD : <0.05%
    • Signal to noise ratio : >100db
    • RCA (phono) sockets & 3.5mm jack input


    Item Number: AMP40
    £27.00 (inc VAT £32.40)
     
  • 480 Watt Rack Mount PA Stereo Amplifier 240Watt + 240Watt with Very Low Distortion

    480 Watt Rack Mount PA Stereo Amplifier 240Watt + 240Watt with Very Low Distortion

    480Watt RMS Stereo 240W + 240W Power Amplifier with Low Distortion at High Output

    240W RMS per Channel @ 4 ohms.
    120W RMS per channel @ 8 ohms
    Volume control for each channel
    Blue LED output level indicators
    Toroidal transformer
    Fan Cooled
    19" 2U Rack Mounting
    Freq response: 20Hz - 20KHz
    THD= less than 0.5%
    Inputs: RCA (Phonos) & 6.3mm Jacks. 10K @ 700mV
    Outputs: Binding Posts, Speakon (NL4) & XLR.
     
    Minimum output load 4 ohms.
    Dims: 483 x 282 x 88mm


    Item Number: AMP4800
    £97.50 (inc VAT £117.00)
     
  • Adastra 240W RMS 5 Channel 100V Line Amp with CD USB, FM Tuner & Bluetooth

    Adastra 240W RMS 5 Channel 100V Line Amp with CD USB, FM Tuner & Bluetooth

     

    ADASTRA 5 Channel 100V Mixer Amplifier with USB, FM Tuner & Bluetooth

    Specifications:
     
    RMS Power: 240W
    Output Impendances: 4 x 100V zone / 8 Ohms / COM terminals
    DC power 24Vdc (screw terminals). Zones 1,2 3,4 All
    Integral Power supply: 110/240Vac, 50/60Hz (IEC)
    Inputs: Mic, XLR, 2 x mic/line jack, 2 x RCA line
    Input sensitivity : mic 1 (balanced) -53dBV
    Input impedance : mic 15K
    Input sensitivity : line (unbalanced)-15dBV (-18.5dBV line 5)
    Input impedance : inputs 2-51K
    Line output: RCA
     
    ControlsMic1, mic/line2+3, line4+5, bass, treble, master volume
    Equalizer: bass 100Hz
    Equalizer: treble 10kH Rear panel switches: Phantom, Vox, Mic/Line (2 + 3)
    Phantom power +20V (mic 1 input)
    Audio source: USB/SD player, FM tuner and Bluetooth receiver
    Bluetooth version 2.0
    THD:  Less than 1%
    Dimensions: 433 x 320 x 89mm


    Item Number: RM240SB
    £188.00 (inc VAT £225.60)
    £197.50 , save 5%
  • Citronics PLX2000 2 x 1000W RMS Stereo Amplifier

    Citronics PLX2000 2 x 1000W RMS Stereo Amplifier

     

    Class H 1000W+1000W RMS in to 2 ohms 19" rackmount Power Amplifier 

     
    Dual Fan cooling and Output Protection. Uses Class H for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors
     
    Bridge mode for high power mono operation
    Output stable down to 2 Ohms
    Removable handles for low profile install
    Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
     
    Bridge mode for high power mono operation
    Removable handles for low profile install
    Switchable clip limiter
         Power supply:  230Vac
    Controls: Level channel 1, level channel 2, ground, mode, clip limiter
    Input impedance: 20k ohms
    Frequency response: 5Hz - 50kHz
    Total harmonic distortion: 0.05%
    Slew rate: 40V/us
    Damping factor:  Less than 400
    Protection: Short-circuit, overload, D.C. and thermal
    Dimensions482 x 453 x 88mm (2U)
     
    Specification:
    Power rms @ 2 Ohms                                                               2 x 1000W                     
     
    Power rms @ 4 Ohms                                                               2 x 700W                       
     
    Power rms @ 8 Ohms                                                               2 x 400W                                                               
     
    Power rms bridge @ 4 Ohms                                                   1700W                           
     
    Power rms bridge @ 8 Ohms                                                   1250W                           
     
    Weight   22.5kg


    Item Number: PLX2000
    £239.00 (inc VAT £286.80)
     
  • Citronics PLX2800 2 x 1400W RMS Stereo Amplifier

    Citronics PLX2800 2 x 1400W RMS Stereo Amplifier

     

    Class H 1400W+1400W RMS in to 2 ohms 19" rackmount Power Amplifier 

    Dual Fan cooling and Output Protection. Class H for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors
     
    Bridge mode for high power mono operation
    Output stable down to 2 Ohms
    Removable handles for low profile install
    Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
     
    Bridge mode for high power mono operation
    Removable handles for low profile install
    Switchable clip limiter
    Powered by:  230Vac
    Controls: Level channel 1, level channel 2, ground, mode, clip limiter
    Input impedance: 20k ohms
    Frequency response: 5Hz - 50kHz
    Total harmonic distortion: 0.05%
    Slew rate: 40V/us
    Damping factor:  Less than 400
    Protection: Short-circuit, overload, D.C. and thermal
    Dimensions 482 x 453 x 88mm (2U)
     
    Specification:
    Power rms @ 2 Ohms                                                            2 x 1400W                     
    Power rms @ 4 Ohms                                                            2 x 1050W                       
    Power rms @ 8 Ohms                                                            2 x 600W                                                               
    Power rms bridge @ 4 Ohms                                                 2300W                           
    Power rms bridge @ 8 Ohms                                                 1750W                           
    Weight   25kg
     


    Item Number: PLX2800
    £329.00 (inc VAT £394.80)
     
  • Citronics PLX3600 2 x 1800W RMS Stereo Amplifier

    Citronics PLX3600 2 x 1800W RMS Stereo Amplifier

     

    Class H 1800W+1800W RMS in to 2 ohms 19" rackmount Power Amplifier 

     
    With Dual Fan cooling and Output Protection. Uses Class H for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors
     
    Bridge mode for high power mono operation
    Output stable down to 2 Ohms
    Removable handles for low profile install
    Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
     
    Bridge mode for high power mono operation
    Removable handles for low profile install
    Switchable clip limiter
    Powered by:  230Vac
    Controls: Level channel 1, level channel 2, ground, mode, clip limiter
    Input impedance: 20k ohms
    Frequency response: 5Hz - 50kHz
    Total harmonic distortion: 0.05%
    Slew rate: 40V/us
    Damping factor: Less than 400
    Protection: Short-circuit, overload, D.C. and thermal
    imensions482 x 453 x 88mm (2U)
     
    Specification:
    Power rms @ 2 Ohms                                                               2 x 1800W                     
    Power rms @ 4 Ohms                                                               2 x 1350W                       
    Power rms @ 8 Ohms                                                               2 x 800W                                                               
    Power rms bridge @ 4 Ohms                                                   2900W                           
    Power rms bridge @ 8 Ohms                                                   2300W                           
    Weight   25kg
     


    Item Number: PLX3600
    £329.00 (inc VAT £394.80)
    £349.00 , save 6%
  • Citronics PPX300 2 x 150W RMS Stereo Amplifier

    Citronics PPX300 2 x 150W RMS Stereo Amplifier

    PPX300 150W+150W RMS 19" Rackmount 2U Power Amplifier 

    With fan cooling and Output Protection
     
    Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
     
    Bridge mode for high power mono operation
    Removable handles for low profile install
    Switchable clip limiter
     
    Specification
     
    Power supply: 240Vac, 50Hz (IEC)
    Controls: Level channel 1, level channel 2, ground, mode, clip limiter
    Input impedance: 20k ohms
    Frequency response: 5Hz - 50kHz
    Total harmonic distortion: 0.05%
    Slew rate: 40V/us
    Damping factor: less than 400
    Protection: Short-circuit, overload, DC and thermal


    Item Number: PPX300
    £139.00 (inc VAT £166.80)
     
  • Citronics PPX600 2 x 300W RMS Stereo Amplifier

    Citronics PPX600 2 x 300W RMS Stereo Amplifier

     

    300W+300W RMS 19" rackmount 2U Power Amplifier 

    With fan cooling and Output Protection
     
    Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
     
    Bridge mode for high power mono operation
    Removable handles for low profile install
    Switchable clip limiter
     
    Specification
     
    Power supply: 240Vac, 50Hz (IEC)
    Controls: Level channel 1, level channel 2, ground, mode, clip limiter
    Input impedance: 20k ohms
    Frequency response: 5Hz - 50kHz
    Total harmonic distortion: 0.05%
    Slew rate: 40V/us
    Damping factor: Less than 400
    Protection: Short-circuit, overload, DC and thermal


    Item Number: PPX600
    £139.00 (inc VAT £166.80)
    £145.00 , save 4%
  • Citronics PPX900 2 x 450W RMS Stereo Amplifier

    Citronics PPX900 2 x 450W RMS Stereo Amplifier

     

    450W+450W RMS 19" rackmount 2U Power Amplifier 

    With fan cooling and Output Protection
     
    Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.
     
    Bridge mode for high power mono operation
    Removable handles for low profile install
    Switchable clip limiter
     
    Specification
     
    Power supply: 240Vac, 50Hz (IEC)
    Controls: Level channel 1, level channel 2, ground, mode, clip limiter
    Input impedance: 20k ohms
    Frequency response: 5Hz - 50kHz
    Total harmonic distortion: 0.05%
    Slew rate: 40V/us
    Damping factor: Less than 400
    Protection: Short-circuit, overload, D.C. and thermal


    Item Number: PPX900
    £215.00 (inc VAT £258.00)
    £225.00 , save 4%
  • KAD2BT Digital Stereo Amplifier with Bluetooth

    KAD2BT Digital Stereo Amplifier with Bluetooth

     

    KAD2BT DIGITAL STEREO AMPLIFIER with BLUETOOTH

    Compact digital amplifier with three selectable stereo inputs & two microphone inputs, delivering up to 55W max. per channel. 
    Mic volume, tone and echo effects are adjustable through rotary controls. 
    Master Volume, Treble and Bass Controls.
    Featuring, Bluetooth connectivity and FM receiver.
    Multi-functional amplifier suitable for both domestic and commercial use.
    Efficient Class D digital amplifier
    Bluetooth connectivity
    Built-in media player with USB and SD card inputs and FM receiver
    A high output power of 55W max. per side
    3.5mm stereo line input on the front panel
    2 phono RCA stereo line inputs
    2 x 6.3mm microphone inputs
    Spring clip speaker output terminals
    Power supply 230Vac, 50Hz (IEC)
    Output impedance 4 to 16 Ohms
    Input sensitivity : Line 380mV
    Input sensitivity : Mic (unbalanced)15mV
    Output power : 8 Ohms 2 x 25W rms / 2 x 40W max. @ 1kHz 
    Output power : 4 Ohms2 x 35Wrms/ 2 x 55Wmax. @ 1kHz 
    Dimension 200x200x65mm
    Weight 1.6kg


    Item Number: KAD2BT
    £49.95 (inc VAT £59.94)
     
  • Stereo 300Watt + 300Watt Power Amplifier with Very Low Distortion

    Stereo 300Watt + 300Watt Power Amplifier with Very Low Distortion

    Stereo Power Amplifier with high output & low distortion. Excellent price!!!
    150W RMS per channel (300W max)
    Volume control for each channel
    Blue LED output level indicators
    Toroidal transformer
    Fan Cooled
    19" 2U Rack Mounting
    Freq response: 20Hz - 20KHz
    THD= less than 0.5%
    Inputs: RCA (Phonos) & 6.3mm Jacks.
    10K @ 775mV
    Outputs: Binding Post/Speakon (NL4) & XLR
    Min output load 4 ohms.
    Dims: 482 x 300 x 88mm



    Item Number: PRO600B
    £92.00 (inc VAT £110.40)
    £99.00 , save 7%
  • Komig Amp 20000 Stereo 1000Watt + 10000Watt Power Amplifier -Very Low Distortion

    Komig Amp 20000 Stereo 1000Watt + 10000Watt Power Amplifier -Very Low Distortion

     

    2000W  total RMS Stereo Power Amplifier with high output & low distortion. 2U 19 inch Rack Mounting

    Features & Spec
     
    1000W + 1000W RMS into 4 ohms @ less than 1% THD
     
    500W + 500W RMS  into 8 ohns @ less than 1% THD
     
    Volume control for each channel
     
    Input connectors: 2 RCA (Phono)  & 2 6.3mm Jacks
     
    Output Connectors: SPK, 4mm Terminal Posts, XLR
     
    Low Profile Toroidal Power transformer
    Fan Cooled
    Input Impedance: 10K ohms
    19" 2U Rack Mounting
    Freq response: 20Hz - 20KHz @ 8 ohms + 0.5dB
    Total Harmonic Distortion (THD): 0.3%
    Crosstalk: >90dB
    Dimensions: 483 x 88 x 242mm


    Item Number: AMP20000
    £139.00 (inc VAT £166.80)
     
  • Konig Bluetooth Audio Receiver

    Konig Bluetooth Audio Receiver

    Konig Bluetooth Audio Receiver

    A surprisingly bright high fidelity sound with extra bass from this small amplifier. An ideal amp for anywhere, fitting neatly into tight spaces. Can be located anywhere (houses, offices, cars, vans, boats etc.)
     
    Audio receiver to stream digital music wirelessly from a tablet or smartphone to an audio system. It is compatible with any Bluetooth enabled device.
     
    Features:
     Easy Pair System
     3.5mm Stereo Connection
     LED indicator for power and connection
    SBC decoder for superior quality sound


    Item Number: BURT
    £24.50 (inc VAT £29.40)
     
  • 2 Way Stereo Speaker Selector 200 Watts

    2 Way Stereo Speaker Selector 200 Watts

    2 Way Speaker Selector Switch in Metal Enclosure

    This unit allows 2 pairs (each stereo) of speakers to be driven by a single stereo amplifier. Simply connect the output of an audio amplifier to connect to Two different speaker pairs individually or together. Each pair of speaker can be individually switched on or off via 2 rocker switches. Each speaker is connected by trigger terminals.
     
    Spring trigger terminals
    Heavy duty Rocker Switches
    200 Watts max
    Entirely Metal Enclosure
     Dimensions:  175 x102 x 70mm


    Item Number: SW2
    £10.80 (inc VAT £12.96)
     
  • 4 Way Stereo Speaker Selector 250Watts

    4 Way Stereo Speaker Selector 250Watts

    4 Way Speaker Selector Switch in Metal Enclosure

    This unit allows 4 pairs (each stereo) of speakers to be driven by a single stereo amplifier. Simply connect the output of an audio amplifier to connect to Four different speaker pairs individually or together. Each pair of speaker can be individually switched on or off via 4 rocker switches. Each speaker is connected by trigger terminals.

    • Spring trigger terminals
    • Heavy duty Rocker Switches
    • 250 Watts max
    • Entirely Metal Enclosure
     Dimensions:  175 x102 x 70mm


    Item Number: SW4B
    £12.25 (inc VAT £14.70)
    £14.60 , save 16%
  • 8 Way Stereo Speaker Selector 100W Per Channel

    8 Way Stereo Speaker Selector 100W Per Channel

    8 Way Superior Metal Loudspeaker Switch 100W Per Channel

    This switcher unit allows the distribution of a stereo amplifier. Simply connect the output of an audio amplifier to this unit and the output can then be distributed to up to eight different stereo speaker sets in eight different locations. Each speaker set can be individually activated via the push buttons on the front of the box. Ideally suited for buildings where an independent sound control is required for different rooms or zones.
     
    • Enables eight pairs of speakers to be connected to a single stereo amplifier
    • Heavy duty push-buttons
    • Built-in overload protection
    • Spring clip terminals
    • Designed for 4-16 ohms speakers
     
    Wiring Gauge 14 to 22 gauge
    Input 1 x stereo
    Output 8 x stereo
    Power per channel     100W max.
    Dimensions     432 x 125 x 55mm
    Weight 2.08kg
     


    Item Number: SSW8
    £39.00 (inc VAT £46.80)
     
  • Professional 4 Way Stereo Speaker Selector up to 140 Watts

    Professional 4 Way Stereo Speaker Selector up to 140 Watts

    4-Way Professional Speaker Selector with Protection Circuit

    This metal switcher allows the distribution of a stereo amplifier. Simply connect the output of an amplifier to the box, this output can then be distributed to up to four different stereo speaker sets in four different locations. Each speaker pair can be individually activated via the push buttons on the front of the box.

     

    • Enables four pairs of speakers to be connected to a single stereo amplifier
    • Heavy duty push-buttons
    • Built-in overload protection
    • Designed for 4-16 ohms speakers
    • Trigger terminals
    Wire Sizes Up to 14 gauge
    Input 1 x stereo
    Output 4 x stereo
    Power per channel 140W max
    Dimensions 215 x 110 x 45mm
    Weight 1.2kg

     



    Item Number: SW4P
    £24.50 (inc VAT £29.40)
     
  • 3 Way Stereo Input Extender Switcher with Phono Sockets (RCA)

    3 Way Stereo Input Extender Switcher with Phono Sockets (RCA)

    3 WAY STEREO INPUT EXTENDER.

    Enabling you to connect up to three extra audio input sources to your stereo - hifi etc which can be selected by the push buttons on the front on the front panel. Ideal for multiple sound sources such as DVD, record player, Cd player, tuner, mp3 etc etc.
     
    Connections via nickel plated RCA sockets
     
    For 3.5mm jack plug to phono convereer leads, please see our selection.
     
    Channel separation 60dB @ 1kHz Crosstalk 70dB @ 1kHz
     
    Input: 3 x 2 stereo RCA Phono
     
    Output: 1 x 2 stereo RCA Phono
     
    Dimensions: 45 x 134 x 86mm


    Item Number: INEX
    £14.50 (inc VAT £17.40)
     
  • 5 Way Stereo Switcher with Phono (RCA) & 3.5mm Sockets

    5 Way Stereo Switcher with Phono (RCA) & 3.5mm Sockets

    5 WAY PROFESSIONAL SCREENED STEREO SWITCHER

    Enabling you to connect up to 5 audio input sources to a stereo sound device - selected by push buttons on the front on the front panel. 
     
    Can be used for mp3 players, CD players, DVD players (sound only), PC sound, record palyers, Cassette players, tuners, TV sound etc etc.
     
    Connections via RCA sockets on rear panel
    3 x 2 RCA stereo inputs, 2 x 3.5mm Stereo Inputs, 1 x 2 Stero RCA outputs.

    For 3.5mm jack plug to phono converter leads, please see our selection.

     



    Item Number: TC716
    £24.95 (inc VAT £29.94)
     
  • AV Switch Box - 3 Way Input Selector with Phono Sockets (RCA)

    AV Switch Box - 3 Way Input Selector with Phono Sockets (RCA)

    3 Way Audio & Video Switched Selector 

    Compact 3-way AV selector. Ideal to connect game consoles or audio/video sources to one TV or Recorder.

    3 Left and 3 Right Audio inputs and 3 Video Inputs.

    1 Left and 1 Right and 1 Video Output.

    All Colour Coded Phono sockets (RCA) 

    Standard Impedance  of 75 ohms for Video and 47K for Audio



    Item Number: AVS6
    £5.95 (inc VAT £7.14)
     
  • Cassette Player Adaptor - listen to mp3, CD etc through hifi of your old stereo

    Cassette Player Adaptor - listen to mp3, CD etc through hifi of your old stereo

     

    Cassette Adaptor

    Allows any line level audio signal to be played through a cassette player, simply by inserting it into the cassette holder of any hifi or car stereo.
    No power supply required - simply plug mp3 player, CD, smart device etc via a 3.5mm jack plug.
     
    Especially suitable for hifi units that have no external input sockets.
     


    Item Number: CAD
    £7.95 (inc VAT £9.54)
     
  • Ground Loop Isolator for Interference Suppression with Phonos (RCA)

    Ground Loop Isolator for Interference Suppression with Phonos (RCA)

    Ground Loop Isolator - Noise Filter, for interference suppression of Hifi, CD players, Turntables, Computers, Car Audio, etc etc. Various Problem Sources can be suppressed or attenuated by inserting this device between phonos (RCA). Gold Plated Contacts.



    Item Number: ZAD1
    £7.00 (inc VAT £8.40)
     
  • 15 Band Graphic Equaliser -1U 19 inch Rack Mount

    15 Band Graphic Equaliser -1U 19 inch Rack Mount

     

    CEQ215 DUAL 15 BAND GRAPHIC EQUALISER

    The CEQ215 is a 19" rack mounted dual 15-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 25Hz to 16kHz for accurate audio spectrum control.
     
    • 2 x 15-band 2/3 octave ISO spacing
    • RF filtered servo-balanced inputs
    • Constant Q each band
    • Bypass switch for EQ comparison
    • Low-cut switch each channel
    • Gain control each channel
    • LED VU meters
    • 19" rackmount 1U
    Power supply115/230Vac, 50/60Hz (IEC)
    Frequency response 20Hz-20kHz
    Input impedance : balanced40k Ohms
    Input impedance : unbalanced20k Ohms
    Output impedance : bal/unbal330 Ohms
    Channel separation >50dB
    Signal to noise ratio >102dB
    THD0.005%
    Dimensions 482 x 44 x 138mm
    Weight 2.0kg
     


    Item Number: CEQ215
    £69.00 (inc VAT £82.80)
    £74.50 , save 7%
  • 31 Band Graphic Equaliser - 2U 19 inch Rack Mount

    31 Band Graphic Equaliser - 2U 19 inch Rack Mount

    CEQ231 DUAL 31 BAND GRAPHIC EQUALISER

     
    The CEQ231 is a 19" 2U rack mounted dual 31-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 20Hz to 20kHz for ultimate EQ control.
     
    • 2 x 31-band 1/3 octave ISO spacing
    • RF filtered servo-balanced inputs
    • Constant Q each band
    • Bypass switch for EQ comparison
    • Low-cut switch each channel
    • Gain control each channel
    • LED VU meters
    • 19" rackmount 2U
    Power supply115/230Vac, 50/60Hz (IEC)
    Frequency response20Hz-20kHz
    Input impedance : balanced40k ohms
    Input impedance : unbalanced20k ohms
    Output impedance : bal/unbal330 ohms
    Channel separation>50dB
    Signal to noise ratio>102dB
    THD0.005%
    Dimensions482 x 88 x 139mm
    Weight3.3kg
     


    Item Number: CEQ231
    £99.95 (inc VAT £119.94)
     
  • CDM84USB 14 Input 19" Rack DJ Mixer

    CDM84USB 14 Input 19" Rack DJ Mixer

    CDM8:4 USB 14-INPUT 19" RACK DJ MIXER

    This 14 input, 4 channel professional DJ mixer is ideal for mobile use and installations. Each channel has 3 band EQ with individual volume control that can be assigned to either side of the crossfader or cue mix fader. It features USB IN/OUT for playback or recording, and there are 3 x microphone inputs, great for karaoke and DJ set-ups.

    • 2 x phono, 6 x line, 2 x USB IN/OUT, 1 x 3.5mm jack and 3 x microphone inputs
    • 3-band EQ on all stereo channels
    • DJ mic + 2 vocal mic inputs for karaoke
    • Hi/Lo EQ for each mic channel
    • 45mm rail glide replaceable crossfader with defeat and assign channels
    • Remote fader starts on stereo channels
    • 3.5mm input option for patching in an MP3 player
    • Internal digital delay or FX loop for vocal mics
    • Individual gain controls on each music channel
    • 12Vdc BNC output for console light
    Power supply 115/230Vac, 50/60Hz (IEC)
    Equaliser : bass -30 +10dB @ 100Hz
    Equaliser : midrange -30 +10dB @ 800Hz
    Equaliser : treble -30 +10dB @ 9kHz
    Signal to noise ratio : line >87dB
    Signal to noise ratio : mic 68dB
    Signal to noise ratio : phono 73dB
    Headphone output 112mV @ 32 Ohms
    Console light power 12Vdc 5W max (BNC)
    Dimensions 483 x 175 x 110mm (4U)
    •  


    Item Number: Q120USB1
    £165.00 (inc VAT £198.00)
     
  • Xenyx QX1202USB Xenyx 12 input Small Format Mixer

    Xenyx QX1202USB Xenyx 12 input Small Format Mixer

    Behringer QX1202USB Xenyx 12 input Small Format Mixer

    The XENYX QX1202USB is a Premium 12 Input 2 Bus Mixer with XENYX Mic Preamps and Compressors, British EQs, 24 Bit Multi-FX Processor and USB/Audio Interface.

    QX1202USB are built for versatility and tone, and are equally at home at your live gig or in the studio. These compact mixers provide 4 mono channels with premium, phantom-powered XENYX mic preamps, neo-classic 3 band British-style EQ, plus 4 stereo channels. 

    If you want it done quickly and need it to sound fantastic, you can count the XENYX QX1202USB to get the job done. 


    Features:

    • Premium ultra-low noise, high headroom analog mixer
    • 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
    • Studio-grade compressors with super-easy 'one-knob' functionality and control LED for professional vocal and instrumental sound
    • Ultra-high quality KLARK TEKNIK FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
    • Built-in stereo USB/Audio Interface to connect directly to your computer.
    • Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com
    • Neo-classic 'British' 3 band EQs for warm and musical sound
    • FX send control per channel for internal FX processor and/or as external send
    • Main mix outputs plus separate control room, phones and 2-Track outputs
    • 2 Track inputs assignable to main mix or control room/phones outputs
    • High-quality components and exceptionally rugged construction ensure long life
    • Conceived and designed by BEHRINGER Germany
    • Premium ultra-low noise, high headroom analogue mixer, 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
    • Studio-grade compressors with super-easy 'one-knob' functionality and control LED for professional vocal and instrumental sound
    • Ultra-high quality KLARK TEKNIK FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
    • Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com
    • Neo-classic 'British' 3-band EQs for warm and musical soundFX send control per channel for internal FX processor and/or as external send


    Item Number: QX1202USB2
    £107.50 (inc VAT £129.00)
     
  • Behringer MX400 Microphone Mixer 4 Channels

    Behringer MX400 Microphone Mixer 4 Channels

    Behringer MX400 Micromix Mono Mixer

    Despite its ultra-compact size, this 4-channel line mixer is big on features! It yields the highest sonic quality at all output levels, boasting ultra low-noise 4580 operational amplifiers for outstanding audio performance the same op amps found in its much bigger brethren.

    • Ultra-compact 4-channel mono line mixer
    • Highest sonic quality even at maximum output level
    • Input Level control for each channel
    • DC 12 Volt adapter included
    • Features ultra low-noise 4580 operational amplifiers for outstanding audio performance
    • Product Dimensions (mm): 46.5x57.2x103.6 (1 5/6x2 1/4x4 1/16)
    • Weight (kg) in packing 220 grams


    Item Number: MX400
    £22.90 (inc VAT £27.48)
     
  • 4 Channel Mono Line & Instrument Mixer

    4 Channel Mono Line & Instrument Mixer

    4 Channel Mono Line & Instrument Mixer 

    Compact mixer with high impedance jack inputs suitable for auxiliary line level or instruments, mixing to a master jack output. Separate volume controls for each input and master output. Complete with 6.3mm Jack to Jack Lead. Powered by 1 x 9V battery or optional 12Vdc adaptor (see BSM1220)

    • Stereo version also available
    • Optional 12Vdc power input
    • Supplied with 9V battery
    • Inputs 4 x 6.3mm Jacks
    • Output 1 x 6.3mm Jack
    • Dimensions: 150 x 108 x 64mm
    • Input Impedance 20K ohms
    • Output Impedance 600 ohms

     

     


    Item Number: LM41
    £23.30 (inc VAT £27.96)
     
  • 4 Channel Stereo & Line & Instrument Mixer

    4 Channel Stereo & Line & Instrument Mixer

    4 Channel Stereo Line & Instrument Mixer 

     

    Compact mixer with high impedance jack inputs suitable for auxiliary line level or instruments, mixing to a master jack output. Separate volume controls for each input and master output. Complete with 2 x 6.3mm Jack to Jack Lead. Powered by 1 x 9V battery or optional 12Vdc adaptor (see BSM1220)

    • Mono version also avaialble
    • Optional 12Vdc power input
    • Supplied with 9V battery
    • Inputs 8 x 6.3mm Jacks
    • Output 2 x 6.3mm Jack
    • Dimensions: 150 x 108 x 64mm
    • Input Impedance 20K ohms
    • Output Impedance 600 ohms

     

     


    Item Number: LM82
    £27.90 (inc VAT £33.48)
     
  • Bluetooth® Compact Mixer

    Bluetooth® Compact Mixer

    Bluetooth Compact Mixer

    Compact format mixing console
     
    With 2 mic/line inputs (jack/XLR) and a stereo line channel, which can be paired to a smart device via an internal Bluetooth receiver. Mic/line channels have individual inserts and all channels have 3-band EQ, Aux and Effect controls. Phantom power of +48V is switchable to the XLR inputs for condenser microphones. Applications range from sub-mixing to main live PA console.Mixing to main live PA console.
     
    Compact, accessible design
    Internal Bluetooth receiver
    Built-in delay effect for vocals
    Channel inserts for Mic/line inputs
    3-band EQ for each channel
    Switchable +48V phantom power
    Specification
     
    ·        Power supply12Vac 1000mA (included)
     
    ·        Phantom power Switchable +48V (XLR inputs)
     
    ·        Bluetooth version2.1
     
    ·        Frequency response : inputs20Hz-20kHz
     
    ·        Stereo input6.3mm jack/RCA (-8 to +15dB / +13 to +60 parallel)
     
    ·        Mic/line channel inputs2 x balanced XLR/jack
     
    ·        SNR : mic inputs120dB E.I.N.
     
    ·        SNR : line inputs95dB E.I.N.
     
    ·        SNR : stereo input96dB E.I.N. (or 104dB E.I.N. in parallel)
     
    ·        EQ: high10kHz, ±15dB
     
    ·        EQ: mid700Hz, ±15dB
     
    ·        EQ: low50Hz, ±15dB
     
    ·        Outputs: main (L+R) 6.3mm jack (+28dBu balanced / +22dBu unbalanced)
     
    ·        Phones output+15dBu stereo 6.3mm jack
     
             Dimensions: 230 x 190 x 60mm


    Item Number: CM4BT
    £90.80 (inc VAT £108.96)