Active Speakers (with integrated amplifier)

av:link M8S Active Subwoofer in Wooden Cabinet with 8 inch Speaker

• Active sub cabinet with 8" (20cm) reinforced driver and internal amplifier with active filter circuit.
• Inputs are on twin RCA phonos or from a stereo amplifier on spring terminals (between amp and mid-top speakers). 
• Cutoff frequency and Gain rotary controls can be adjusted as required. "Auto Off" function deactivates the amplifier when no incoming signal is detected to conserve energy.

CASA Active PA Cabinets with DSP, USB/SD and Bluetooth

Versatile full-range active moulded PA cabinets with built-in high efficiency class D amplifier. A DSP controller offers 5 switchable output profiles which are suited to different program material. Inputs are provided on XLR/jack with mic/line level switching and RCA line connectors. A built-in audio module provides playback from USB or SD media and Bluetooth wireless pairing. These cabinets are fully featured for virtually any PA application and pair perfectly with the CASA series sub cabinets for high energy sound reinforcement.
 

• High efficiency class D bi-amplifier section

• DSP speaker control with 5 selectable profiles

• Inbuilt USB/SD audio player

• Bluetooth wireless connectivity

• High impact moulded cabinet with side and top handles.

• 35mm pole mount socket

Citronics CASA Active Sub Cabinet 500W max 300W rms with 10" Driver

Lightweight yet powerful active subwoofer

Class D amplifier. Constructed from 15mm MDF with integral side handles for easy portability

35mm socket to accommodate a mounting pole.

Front-loaded speaker with a protective steel grille to deliver powerful detail

Class D amplifier section has stereo line inputs and outputs

Use either as a mono sub with stereo tops or a matching sub for each top speaker.

Line inputs have a parallel Link output to pass the signal onto further active speakers

A phase switch is included to avoid sound cancellation

• Compact and lightweight design
• 15mm MDF cabinets with hard-wearing paint finish
• 2 x side carry handles
• 35mm pole mount socket
• Power supply 230Vac, 50Hz (IEC)
• Construction15mm MDF with durable texture paint finish
• Hardware 2 x side carry handles + 35mm pole mount socket
• Amplifier: constructionClass D
• Line inputs L+R balanced XLR
• Line outputs L+R balanced XLR & L+R link XLR
• Controls Output level, phase switch, high pass x-over (output)
• Weight: 16.23kg

Active speakers contain their own amplifier to drive the speaker,  impedance and power handling matched

A simple solution for distributed audio systems.

Active sound-reinforcement speakers with polypropylene enclosures and built-in class-D amplifier modules. Each cabinet is equipped with an extended frequency main driver and a titanium compression driver for optimum clarity. Power from the internal bi-amplifier is controlled from an internal DSP section, offering pre-set profiles with crossover, EQ and dynamics processing to suit the program material. Custom settings can be created via the onboard rotary encoder and backlit display or by connecting the CLARA unit to a PC or laptop via USB and editing using the free-to-download ADU software application. 2 combo inputs on the rear panel can accept balanced or unbalanced line level audio with 6.3mm jack or XLR connection. An integral Bluetooth® receiver can be paired to a smart phone and audio can be streamed wirelessly through input A. In addition to a line level input for input B, there is a mic/line level switch to enable direct connection of a microphone. Maximum sound impact from a lightweight and easy to manage cabinet.

• DSP speaker management with editing software
• Bluetooth connectivity
• High power class-D bi-amplifier
• High impact PP cabinet with side & top handles
• 35mm pole mount socket

Mighty Lite BT mkII Amplifier

Mighty Lite BT now reaches the mkII generation with this reinvented model, adding new features, modes and computer editing to an already winning formula, bringing a world of sonic possibilities to the guitar player in a compact and convenient package. Keeping with the desktop form factor and powered by 6 x AA batteries or optional 9V adaptor, the mkII adds a USB type-C port which can connect to a PC or Mac computer to edit settings using the Mighty Editor software. In addition, the Bluetooth connection enables wireless editing via the Mighty Amp app. Both software and app are free to download from www.nuxefx.com. Mighty Lite BT mkII also supports audio streaming over Bluetooth for backing tracks and a built-in drum machine for solo practice. New features include effects, modulations and new amp models with an IR loader for flexible cabinet simulation, which can be programmed and stored into 7 internal presets. This new version offers a huge pallete of tones in a manageable and versatile package for bedroom practice, project studios and travelling guitar players.

av:link Pair of Active Bluetooth Bookshelf Speakers (amplified speakers)

A pair of Small, but powerful amplified, modern speaker pairs offering contemporary styling.

Bluetooth connectivity gives you the freedom to stream wirelessly from any smart device or direct MP3 playback via USB and Micro SD ports.

Inputs also include 3.5mm AUX to connect to TVs, PCs and laptops.

Control these speakers using the side panel controls or convenient remote control for enhanced sound and incredible audio response.

• Modern and stylish design with 3.5" woofers and 1" dome tweeters that deliver deep, rich bass and crisp, clear treble
• Bluetooth wireless connectivity enables simple connection to a wide range of smart devices
• Direct MP3 playback via inbuilt USB and Micro SD ports
• Connect to your TV, PC or notebook via the 3.5mm AUX input
• Side panel controls for mode change and volume adjust
• Attractive Satin Black finish
• Supplied with full functioning remote control

Specification

qtx QR8K 80W ACTIVE MOULDED SPEAKER CABINET (178.310)

• Microphone and line inputs with volume controls
• Titanium HF compression driver
• Compact moulded enclosure with carry handle
• Integral flying points and 35mmØ pole mount.

qtx QR10K ACTIVE MOULDED SPEAKER CABINET (178.311)

• Microphone and line inputs with volume controls
• Titanium HF compression driver
• Compact moulded enclosure with carry handle
• Integral flying points and 35mmØ pole mount.

qtx QR12K ACTIVE MOULDED SPEAKER CABINET (178.313)

300W Max injection moulded speaker cabinets with built-in amplifier and input section. Independent mic and line channels make this range ideal for DJs, vocalists and karaoke setups.

• Microphone and line inputs with volume controls
• Titanium HF compression driver
• Compact moulded enclosure with carry handle
• Integral flying points and 35mmØ pole mount.

  Power supply                                        220-240Vac, 50/60Hz 

  Woofer                                                  300mm (12'')

  Amplifier output power : rms                 80W

  Amplifier output power : max.               180W

  Power handling : speaker max.             300W

  Speaker output through socket             8 Ohms min, 90W max.

  Frequency response                              50Hz - 20kHz

  Dimensions : W(front/rear) x H x D       350/180 x 570 x 300mm 

   

qtx QR15K ACTIVE MOULDED SPEAKER CABINET (178.316)

• Microphone and line inputs with volume controls
• Titanium HF compression driver
• Compact moulded enclosure with carry handle
• Integral flying points and 35mmØ pole mount.

QUEST 15" Active PA Cabinet

• Inbuilt class-AB amplifier
• USB/SD media player with FM tuner & Bluetooth
• Durable moulded polypropylene cabinet
• Fitted with rear wheels for easy portability
• 35mm pole mount socket for stand mounting

qtx QR12PA 12 inch 200W RMS Active Portable PA Unit

qtx QR15PA 15 inch Active Portable PA Unit

Contains a Built-in amplifier operating from mains or internal rechargeable battery, powering a 15 inch main driver and compression driven horn unit.
A pair of VHF handheld wireless microphones are included with the receiver built into the mixer/amp section at the rear along with 2 further mic inputs, auxiliary line input and integral USB/SD media player. A moulded handle and pole mount are included and a retractable trolley handle and rear wheels provide easy portability.

Specs

• Echo effect for microphones
• 2 x VHF handheld microphones included
• Integral USB/SD digital audio player with remote
• Mains/rechargeable operation
• Built-in trolley facility
• Switchable VCV "mic override" function
• Moulded handle and internal 35mm pole fitting
• Optional neck worn transmitter available
• Power supply: 220-240Vac, 50/60Hz, External/internal battery.
• Bass Driver: 380mm 15 inch Speaker
• HF driver: 25mm (1inch) Titanium compression driver
• Freq Response: 45Hz – 20KHz

Battery life: Up to 8 hours
Controls: Volume, Bass, Treble, Echo, Mic volume, VCV & VHF mic levels
Inputs: 2 wired mic (jack) and aux (RCA & 3.5mm)
Wireless mic freq: 174.1MHz + 175.0MHz
Power Handling: 250W rms
Weight: 18.4Kg

qtx BUSKER12 80W rms Busker PA with 2 VHF Mics, Media Player, Bluetooth & Remote

• Front mounted control panel.
• Built-in amplifier, mains or internal rechargeable battery operated
• 12 inch Driver & Compression Top Driver Horn
• 2 Handheld VHF microphones
• 2 further wired mic inputs at rear 
• Auxiliary line input
• Musical instrument input 
• Bluetooth receiver. 
• Integral USB/SD/FM media player. 
• Fitted with carrying handle and 35mm pole mount
• Retractable trolley handle and rear wheels provide easy portability.
• VHF handheld microphones included
• Echo effect for microphones
• Integral USB/SD/FM media player
• Bluetooth receiver
• Built-in trolley facility with retractable handle
• Switchable Microphone 'voice-over' Function 

qtx BUSKER15 100W rms busker PA with 2 VHF Mics, Media Player & Bluetooth, 2 Microphones & Remote 

Everything you need in this complete, portable & versatile busker PA amplifier

• Front mounted control panel.

• Built-in amplifier, mains or internal rechargeable battery operated

• 12 inch Driver & Compression Top Driver Horn

• 2 Handheld VHF microphones

• 2 further wired mic inputs at rear 

• Auxiliary line input

• Musical instrument input 

• Bluetooth receiver. 

• Integral USB/SD/FM media player. 

• Fitted with carrying handle and 35mm pole mount

• Retractable trolley handle and rear wheels provide easy portability.

• VHF handheld microphones included

• Echo effect for microphones

• Integral USB/SD/FM media player

• Bluetooth receiver

• Built-in trolley facility with retractable handle

• Switchable Microphone 'voice-over' Function 

Power output 100W rms

Freq response 50Hz - 16kHz

SPL @ 1W/1m 96dB

Main driver  380mm (15")

Wireless microphone frequencies 174.1MHz + 175.0MHz

Battery life Up to 6 hours

Recharge time 8 hours

Battery type 12V 7Ah rechargeable sealed lead-acid

Dimensions 720 x 470 x 450mm

Weight 14.5kg

qtx QX12PA 12 inch 150 + 150W  Amplifier & Speaker Wireless Portable Trolley Combo PA with USB/SD/FM & Bluetooth

• Main driver and compression driven horn unit.
• 2 x VHF handheld wireless microphones included with receiver built into the rear panel.
• 2 further mic inputs, auxiliary line input and Bluetooth receiver.
• Internal audio source is provided by an integral USB/SD/FM media player.
• Moulded handle and pole mount included
• Retractable trolley handle and rear wheels for easy portability.
• Optional neckworn transmitters available - 174.1MHz & 175.0MHz 
• Echo effect for microphones
• 2 x VHF handheld microphones included
• Integral USB/SD/FM media player/recorder with IR remote
• Duplex Bluetooth receiver

qtx QX15PA 15 inch Amplifier & Speaker  Wireless Portable Trolley Combo PA with USB/SD/FM & BLUETOOTH

Complete with 2 Microphones & Remote. 

• Complete portable PA unit in a QX15PA cabinet. Built-in amplifier operating from mains or internal rechargeable battery powering a main driver and compression driven horn unit.
• 2 x VHF handheld wireless microphones are included with the receiver built into the rear panel along with 2 further mic inputs, auxiliary line input and Bluetooth receiver.
• Internal audio source is provided by an integral USB/SD/FM media player. A moulded handle and pole mount are included and a retractable trolley handle and rear wheels provide easy portability.
• Optional neckworn transmitters available - 174.1MHz (178.851) and 175.0MHz (178.852)
• Echo effect for microphones
• 2 x VHF handheld microphones included
• Integral USB/SD/FM media player/recorder with IR remote
• Duplex Bluetooth receiver
• Mains/rechargeable operation
• Built-in trolley facility
• Switchable VCV "mic override" function

qtx QT15SA ACTIVE 15 inch 600W AMPLIFIED SUB CABINET

qtx QT18SA Active 18 inch 1000W Amplified Sub Woofer Cabinet

Active 18" subwoofer with integral amplifier and adjustable low pass filter in rugged, carpet covered wooden cabinet.Active 18" subwoofer with integral amplifier and adjustable low pass filter in rugged, carpet covered wooden cabinet.Active 18" subwoofer with integral amplifier and adjustable low pass filter in rugged, carpet covered wooden cabinet.

*  Adjustable cutoff frequency
*  Metal corner protectors
*  Side mounted carrying handles
*  Integral 35mm pole-mount

Power supply: 230Vac, 50Hz
Cutoff frequency: 40 - 150Hz
Connections: XLR line in, XLR line out
Model: QT18SA
Driver: 450mm (18")
Power output max: 1000W
Dimensions: 585 x 475 x 675mm