|Now FREE Delivery on UK mainland orders over £30+VAT|
IC Socket Standard 8 pin
IC Socket Standard 14 pin
IC High Quality Turned Pin Socket. Totally protected from solder. Gold plated contacts 6 pin
Panel fuseholder 20mm with screw on cap
Fuse holder for size 5x20
- Screw cap
- 13mm Cut out
- 36.3mm total length
- Torsion protection
- Material soldering lugs: Copper
- max. 250 V, 10 A
- Dielectric Strength:
Insulation resistance > 1000 mΩ
Contact resistance < 0.02 Ω
- Ambient temperature: -10 ~ +50 °C
Carbon Film Resistor 1/4 Watt 5% 10 Pack. 10K ohms
Linear Control Pot 24mm with 6mm x 42mm round spindle with flat part 10K Lin
5.1V 1.3W. Zener Diode. 5% Tolerance.
LED Bezel 5mm. High quality Nickel-plated complete with 8mm retaining nut.
Rubber push-fit retaining mount for 5mm LED legs at rear
UNO R3 Arduino-compatible board with the ATMega328P, ATMega16U2 and CH340G serial converter
Since Arduino is an "Open Source" hardware as well as software anyone can duplicate the Arduino Uno R3 boards exactly, even using original parts, this means we are able to supply this Arduino compatible board at a fraction of the cost of the original but still working identicaly to the original.
The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.
Arduino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. The development board has everything needed to support the microcontroler to help you create an endless amount of projects and if you are just starting then the worldwide Arduino community is full of ideas, guides and help to get you started or help you complete your project.
1 x Arduino Compatible Uno R3 development board
1 x USB Cable
Software can be downloaded from the Arduino website here
Login to post a review