|Now FREE Delivery on UK mainland orders over £30+VAT|
Plug in adaptor allowing equipment fitted with a European Schuko plug to be used in a UK mains outlet.
Metallised Polyester Dipped Capacitor 250VDC Tolerance 10% 100nF (0.1uF)
Panel fuseholder 20mm with screw on cap
Fuse holder for size 5x20
- Screw cap
- 13mm Cut out
- 36.3mm total length
- Torsion protection
- Material soldering lugs: Copper
- max. 250 V, 10 A
- Dielectric Strength:
Insulation resistance > 1000 mΩ
Contact resistance < 0.02 Ω
- Ambient temperature: -10 ~ +50 °C
Miniature Toggle Switch SPDT Single Pole Changeover Centre-off. On/Off/On
5A @ 125V, 3A @ 250V.
Needs 6mm cutout
Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 64 X 95mm
Axial Electrolytic Capacitor. Low leakage. 16uF 450V 16x32mm
Ripple Current 130mA @ 120Hz
Strengthened Flexible Crocodile Test leads - Set of 10
A High Quality set of 10 x 500mm test leads in 5 colours, red, black, green, yellow and white. That's 20 soft plastic insulated 25mm crocodile clips.
Essential for engineers, experimenters & hobbyists. Current Rating 2.5A each lead (more if you dare!)
Lead Length: 500mm
100uF 16V Radial Electrolytic 105C High Temperature, Low Leakage, Tol 20%
Diode, Wire Ended Rectifier 1A 1000V
Login to post a review
470uF 250V 1.5A Ripple, 105C. SNAP-IN Electrolytic capacitor. 22.5d x 45h mm Tolerance 20%. Samwha HK series.