The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
+44 (0)20-84520161 Contact Us
Now FREE Delivery on UK mainland orders over £30+VAT

3A20 2 x AAA Battery Holder with solder tags

  • Details

  • Recommended

  • Send

Details

Item Number
3A20
Item Condition
New
Price
£0.65 (inc VAT £0.78)

Options

Quantity


  • TIP41C Transistor

    TIP41C Transistor

    NPN TO220 100V 6A 65W

    Manufactured by ST Microelectronics.

    TIP41C
    £0.75
  • 33 ohms 5 Watt Wirewound Axial Resistor

    33 ohms 5 Watt Wirewound Axial Resistor

    5-6 Watt 5% Wire-wound Resistor 33 ohms

    resistors may vary from Illustrations

    5W33R
    £0.50
  • PP3 9Volt Strong Hard Plastic Battery Snaps

    PP3 9Volt Strong Hard Plastic Battery Snaps

    Strong Solid Plastic PP3 9 Volt  Battery Snaps.

    With 150mm Red & Black PVC covered wires emerging at one end.

    Water repellent body.

    Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries

    PP3H
    £0.50
  • PP3BX PP3 9Volt Battery Holder

    PP3BX PP3 9Volt Battery Holder

    PP3 Battery Holder with solderable PCB pins & 3 mounting holes.

    54 x 30 x 21mm

    PP3BX
    £1.50
  • Small  DPDT Slide Switch

    Small DPDT Slide Switch

    Small Slide Switch DPDT 125V 250mA, 250VAC @ 100mA max

    L23 x H19mm x x W7.5mm. Hole spacing: 19mm. 6 Solder Tags 4mm spacing.

    6 Solder tags.

    SM22
    £0.50
  • Standard DPDT Slide Switch with Solder Tags

    Standard DPDT Slide Switch with Solder Tags

    Standard Slide Switch DPDT 150V 3A max.

    Size L39 x H18.7 x 8mm. Fixing holes centres 30mm.  Dolly cut out: 113 x 6.5mm

    6 Solder tags 6mm apart

    SL22
    £0.50
  • Electret Microphone Insert  11 x 7mm

    Electret Microphone Insert 11 x 7mm

    Electret Microphone Insert (Condenser Mic Insert). dimensions: 11 x 7mm. Impedance 300-1000 ohms. Freq response 50Hz to 12KHz. Works from 1-10VDC. Small battery will power this unit such as SG13S. 2 Solder Contacts on the back. Change 1K resistor to lower value for lower battery voltage.

    G143C
    £1.00
  • Digital Panel Meter for Voltage and Current 0-100VDC 0-10ADC

    Digital Panel Meter for Voltage and Current 0-100VDC 0-10ADC

    Dual Display Panel Meter, 0-100VDC and 0-10ADC 

     
    This handy compact panel meter will display the voltage and current clearly. It is ideal for a bench power supply or any project that requires accurate voltage and or current measurement. The meter can either be powered from the supply it is measuring if it is between 4.5-30VDC or from an independant power source.
     
    Voltage Measurment : 0 - 100VDC
    Current Measurment : 0 - 10ADC
    Working Voltage : 4.5 - 30VDC
    Dimensions : (W)48mm x (H)29mm x (D)22mm
     
    Connetions
    Red (Thick) - Voltage in for Current Measurment
    Black (Thick) - Voltage out for Current Measurment
    Red (Thin) - Supply Positive 4.5-30VDC
    Black (Thin) - Supply Ground
    Yellow (Thin) - Voltage to be Measured 0-100VDC
    DPM
    £5.50
  • Toggle Switch SPDT (Changeover) 16(10)A 250V AC

    Toggle Switch SPDT (Changeover) 16(10)A 250V AC

    High Quality Changeover (SPDT) Toggle Switch with Metal Dolly.

    Rated at 250VAC 16A 12mm cut-out/nut. Contact Resistance 100 milliohms max

    Dims: Total Height (Toggle Tip to Tags Ends): 59mm, Width: 15mm. Length: 30mm

    Dielectric Strength: 1000V RMS (min)

    ROHS Compliant

    TB11N
    £2.50

Send to Friend

: *
: *
: *
Type the characters you see in the picture:


*

Battery holder for 2 X AAA batteries - in series to give 3V. Solder Tags on Top End

Recently Viewed


Trustpilot