|Now FREE Delivery on UK mainland orders over £30+VAT|
1000pF. 350V Feed-Through Capacitor (1nF, 0.001uF).
Old RF stock, but new unused
470uF 25V Radial Electrolytic 105C High Temperature, Low Leakage, Tol ±20%
2N4416 N JFET TO72 N Channel Junction FET 30V 15mA Idss=5mA
Mercury/Eagle Soldering Station 703.050 (SL30C) Professional 48W Temperature Controlled with Ceramic Soldering Iron with didgital LED Display
Professional soldering station with numeric digital display of the temperature. The soldering iron incorporates a ceramic heating element assuring a highly accurate temperature setting and a fast heating time. The bit is directly fitted on the element to minimise thermal loss. The lead of the iron is made of heat-resistant silicone. The iron holder can be mounted on the right or the left side of the station.
For spare soldering iron - please go to SIR30
Spare Soldering iron for SL30C Temperature Controlled Soldering Stations.
Slide-fit over many solid soldering iron shafts
Coated tips for long life.
Shaft: length 65mm, diameter 7.1mm
71mm shaft length
1 of each tip:
2.7mm chisel face
9A DC-DC Step Down Voltage Regulator (Buck Converter)
This step down voltage regulator uses high frequency switching to make a very efficient DC-DC converter. It can take an input of 5V to 40V and lower it to between 1.2V and 35V at up to 9A(output). The voltage is set with one potentiometer and the constant current can be set with the other from 200mA to 9A.
note: If using this converter at its limits, you will need to fan cool the converter.
Voltage in : 5V - 40VDC
Voltage out : 1.2V- 35VDC
Constant Current Range : 200mA - 9A
Maximum Output Current : 9A
Dimensions : 65mm x 48mm
Dual Display Panel Meter, 0-100VDC and 0-10ADC
This handy compact panel meter will display the voltage and current clearly. It is ideal for a bench power supply or any project that requires accurate voltage and or current measurement. The meter can either be powered from the supply it is measuring if it is between 4.5-30VDC or from an independant power source.
Voltage Measurment : 0 - 100VDC
Current Measurment : 0 - 10ADC
Working Voltage : 4.5 - 30VDC
Dimensions : (W)48mm x (H)29mm x (D)22mm
Red (Thick) - Voltage in for Current Measurment
Black (Thick) - Voltage out for Current Measurment
Red (Thin) - Supply Positive 4.5-30VDC (connect to voltage to be measured if not using a seperate supply)
Black (Thin) - Supply Ground (Do not connect if not using a seperate supply)
Yellow (Thin) - Voltage to be Measured 0-100VDC
Tantalum Bead capacitor. 22uF 25V